Évaluations - 5, GPA: 4
(
)
)
|
Facilité d'utilisation
Do NOT attempt to move or store this outdoor fireplace until all ashes and coals are completely extinguished. Do NOT remove ashes or coals until they are completely and fully extinguished. Use heat-resistant gloves or hot pads when contacting handles. Use long, sturdy fireplace tools when adding or moving logs. Do NOT place wood directly into bottom of the outdoor fireplace. Place wood only on the wood grid. Do NOT overload the fireplace. Do not add additional firewood until the fire burns down. NOTICE: If any portion of the bowl, lid or spark guards of this outdoor fireplace are glowing red it is overloaded. Do NOT lean over this outdoor fireplace when lighting or when in use. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. Avoid breathing smoke from the fire and avoid getting it into your eyes. This outdoor fireplace should be thoroughly inspected and cleaned on a regular basis. After a period of storage and/or non-use, check for signs of damage and creosote build-up. Do NOT operate until necessary repairs and/or cleanup are executed. Use only Blue Rhino Global Sourcing, LLC factory authorized parts. The use of any part that is NOT factory authorized can be dangerous and will void your warranty. Please use protective gloves when assembling this product. Do not force parts together as this can result in personal injury or damage to the product. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no. Parts List 1 Top 55-12-706 2 Hood 55-12-707 3 Frame A (2) 55-12-708 4 Frame B 55-12-709 5 Frame C 55-12-724 6 Rear Screen Panel 55-12-710 7 Side Screen Panel (2) 55-12-725 8 Screen Door 55-12-711 9 Wood Grate 55-12-714 10 Base Panel 55-12-713 11 Peg (4) 55-12-715 12 Base 55-12-716 Exploded View 1 2 3 3 4 6 7 5 7 8 9 10 11 12 Hardware A Screw M6x10 Back Nickel Plated Phillips Truss Head 20 pcs B Screw M6x60 Back Nickel Plated Phillips Truss Head 4 pcs C Nut M6 Black Nickel Plated 2 pcs Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver 1 DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and model number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. Typical assembly: approximately 30 minutes. 1 Attach Hood C x 2 3 Attach Frame A x 8 4 Place Pegs and Base Panel Assembly Instructions 5 Attach Hood Assembly B x 4 6 Attach Screens A x 12 8 Attach Spark Guard Door 7 Insert Wood Grate Cleaning and Care (continued) Operating Instructions WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1. Make sure there is only a small amount of ash in the bottom of the bowl. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. 4. Use a match to light kindling or firestarter. 5. Using heat resistant gloves close spark guard door, once the kindling or firestarter is lit. Tending the Fire You may need to shift and/or add logs for an ideal experience. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 1. Using heat resistant gloves, carefully open spark guard door. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top of coals. Be careful not to shift ashes. 5. Using heat resistant gloves close spark guard door. Cooking 1. Using heat resistant gloves, carefully open spark guard door, and if necessary slide cooking grid no more than 1/2 way out. 2. Using heat resistant gloves, place food onto cooking grid above the hot coals with long handle tongs. 3. Using heat resistant gloves close spark guard door, cook until desired internal food temperatures are achieved. 4. If food needs to be turned over, repeat “Cooking” Instructions. 5. To remove food: a. Using heat resistant gloves, carefully open spark guard door, and if necessary slide cooking grid no more than 1/2 way out. b. Using heat resistant gloves, remove food fro...