Évaluations - 4, GPA: 4 ( )

Fabricant : Lennox Hearth Taille : 116.16 kb Nom Fichier : Langue d'enseignement:

NO. MODEL WHERE USED 81L34 ADK35CPB EDV3530, ED3530 81L35 ADK40CPB EDV4035, ED4035-2, LMDV-4035, SSDV-4035, MPD4035, EDVST, EDST-2, EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBST-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 81L36 ADK45CPB EDV4540, ED4540-2, MPD4540 81L37 ADK24CPB EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 98L05 ADK33CPB MDR3328, MDT3328, MPDT3328, MPDR3328, LMDVR-3328 26M43 ADK35CMPB MPD3530, MPD35ST, MPD35PF, MPB35ST, LMDV-3530, SSDV-3530 H7026 ADK22CMPB MPD35PF Table 1 - Arch Door Kit with Brass Trim CAT. NO. MODEL WHERE USED 98L68 ADK35CBS EDV3530, ED3530 98L69 ADK40CBS EDV4035, ED4035-2, LMDV-4035, SSDV-4035, MPD4035, EDVST, EDST-2, EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBST-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 98L70 ADK45CBS EDV4540, ED4540-2, MPD4540 98L71 ADK24CBS EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 98L62 ADK33CBS MDR3328, MDT3328, MPDT3328, MPDR3328, LMDVT-3328, LMDVR-3328 26M44 ADK35CMBS MPD3530, MPD35ST, MPD35PF, MPB35ST, LMDV-3530, SSDV-3530 H7027 ADK22CMBS MPD35PF Table 2 - Arch Door Kit with Brushed Stainless Steel Trim NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Bend The Arch Tab 90 Degrees Into The Glass Frame U-channel Inside Top Corner View of Glass and Arch Figure 2 Glass Frame U-Channel Step 9. Position the glass door and arch assembly in front of the firebox opening with the bottom of the door held away from the fireplace. Hook the top flange of the door frame over the top of the firebox frame. Let the bottom of the door frame swing gently in towards the fireplace ensuring that the gasket seats evenly as the door frame draws shut. Fasten the two latches located underneath the firebox floor to the door’s vee-flange. Close both the latches securely. Step 10.Reinstall the modesty panel. Step 11.Reinstall the bottom compartment door. Step 12. Close the bottom radiant panel or louver assembly. Hood must be installed as shown. Top of Appliance Top Radiant Panel Top of Door Frame Figure 3 - Clean Face Hood must be installed as shown. Top of Appliance Louver Assembly Top of Door Frame Figure 4 - Louvered Face Step 13.Reinstall the top radiant panel/hood assembly, or hood and louver assembly. Make certain that the hood is installed as shown in Figure 3 (clean face models) or Figure 4 (louvered models). The fireplace must not be operated without the hood installed as shown in these figures. Note -Do not reinstall the top and bottom bustle with this arch door kit installation. Keep them for any possible future re-decorating. Part B - Merit, Merit Plus & SSDV Series Fireplaces Step 1. Slightly lift and pull the existing top radiant panel/hood assembly away from the fireplace, or pull hood and slightly lift and pull the existing louver assembly away from the fireplace. Step 2. Open the bottom compartment door (either a radiant panel or louver assembly) by pushing in simultaneously the left and right top...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :