Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
The safety alert symbol, is a universally recognized symbol used to identify safety information about hazards that can result in personal injury. When this symbol is used you should pay very close attention to what is written. Review these instructions before beginning assembly or using your fireplace. FOLLOW INSTRUCTIONS AND WARNINGS TO AVOID FIRE, SERIOUS INJURY OR DEATH. WARNING • Outdoor use only. Never use in enclosed area. Use in unventilated areas will endanger your life. • Keep away from all combustible materials including gasoline and other flammable liquids and vapors. • Use on a level, noncombustible surface only. Keep away from house, garage, balconies, or eave overhangs. • Keep out of the reach of children. • Be sure screen is in place while in use and do not use in windy conditions. • Do not overfill firebox or use to burn leaves and trash. • Exercise the same care you would with an open fire. • Never leave unit unattended when hot or in use. • Completely extinguish fire before leaving. • Use gloves when handling or moving. Ashes can remain warm for a long time after extinguishing. • Dispose of cold ashes properly. • Do not modify in any way nor use with parts not expressly approved by Coleman. • Combustion by-products produced when using this product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Contact local authorities regarding possible burn restrictions before using product. Fireplace Parts Check List • Check package for all parts needed for assembly. ¦ 1. Firebox ¦ 6. Grate ¦ 2. Leg Support Ring ¦ 7. Leg Brackets ¦ 3. Firebox Support Ring ¦ 8. Hardware Kit w/handle ¦ 4. Protective Cover ¦ 9. Screen Assembly ¦ 5. Screen Lifting Tool • Check all items for shipping damage. Call Coleman at 1-800-835-3278 or TDD: 316-832-8707 if you have any problems. 1 9 2 3 8 6 5 4 7 Assembly Assembly (cont.) 3. Place Firebox Support Ring on top of Leg Brackets as shown. Carefully align holes as shown. 4. Insert long bolts and secure with nuts. Tighten all bolts in Leg Support Ring and Firebox Support Ring. Align holesFirebox Support Ring Leg Bracket 1. Carefully unpack all parts from shipping box. 2. Align holes in Leg Bracket and assemble to Leg Support Ring as shown. Attach with small bolts and nuts. Hand tighten. Leg Support Ring Leg Bracket T ighten all bolts (continued on other side) Assembly (cont.) 5. Place Firebox into Firebox Support. Note: An inch or two of sand should be used in firebox beneath the grate. 6. Place Grate into Firebox. Set Up and Use WARNING Never leave unit unattended when hot or in use. Keep out of reach of children. For outdoor use only. Never use in enclosed area. Use in unventilated areas will endanger your life. 1. Place unit on a level, noncombustible surface. Keep well away from house, garage, balconies or eave overhangs. Do not use on wooden decks. 2. Be sure grate is placed in firebox. Add newspaper, kindling & wood on top of grate. 3. Ignite newspaper & kindling with match or butane lighter. 4. Once fire is lit, place screen assembly on top of firebox. 5. Screen handle is hot when in use. Use the Screen Lifting Tool to remove screen. After Use WARNING To avoid burns – use heavy gloves to remove screen assembly and grate. 1. Completely extinguish fire before leaving. 2. Do not use water to douse the fire as this may warp the firebox. 3. Dispose of cold ashes properly. 4. Be careful – fire may be out but firebox can still be hot. Handle carefully. 5. Store in covered enclosure. Repair Parts List Model Model DESCRIPTION 5059-707 5059A720 Part No. Part No. 5059-1551 5059-1551 Leg Support Ring 5059-1351 5059-1351 Firebox Support Ring 5059-1011 5059-1011 Protective...
Ce manuel est également adapté pour les modèles :Cheminées - 5059A720 (257.16 kb)