Log:
Évaluations - 3, GPA: 3.3 ( )

Instructions Coleman, Modèle 5055-720

Fabricant : Coleman
Taille : 311.8 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Contact local authorities regarding possible burn restrictions before using product. Fireplace Parts Check List • Check package for all parts needed for assembly. ¦ 1. Firebowl ¦ 6. Chimney Screen ¦ 2. Screen Assembly ¦ 7. Hardware Kit ¦ 3. Dome Assembly ¦ 8. Leg Support Ring ¦ 4. Protective Cover ¦ 9. Grates ¦ 5. Top Ring ¦ 10. Leg Assemblies • Check all items for shipping damage. Call Coleman at 1-800-835-3278 or TDD: 316-832-8707 if you have any problems. 1 2 3 4 5 68910 7 Assembly (cont.) 3a. Assemble Leg Support Ring to the four leg assemblies. Fasten to Leg Brackets with one small screw per leg (see arrows). Tighten all fasteners. 3b. Install four foot pads, one into each leg. NOTE: In some models, the foot pads are pre-installed by the factory. The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, KS 67219 1-800-835-3278 • TDD: 316-832-8707 © 2005 The Coleman Company, Inc. All rights reserved. Coleman® and are registered trademarks of The Coleman Company, Inc. 5055-050 (3/9/05) Assembly 1. Carefully unpack all parts from shipping box. NOTE:. In Steps 2 and 3, the stand is assembled up side down for ease of assembly. Use a ground cloth to protect the finish. 2. Align holes in Leg Assembly Brackets with holes in Top Ring. Attach with two small screws per leg. Hand tighten. To p Ring (Large) 4. Turn frame right side up. Place Screen Assembly into frame. Make sure door is centered between two Leg Assemblies, and can open and close properly. remanufactured product or component. be made with a similar product of equal endanger your life. 7. Install two Assembly (cont.) Set Up {(See Note) HandleLatch Bar WARNING 5a. Assemble screen NOTE: Two hex nuts and latch Never leave unit unattended when hot or in use. Keep out of reach of children. For outdoor use only. Never use in enclosed area. Use in unventilated areas will assemble on the inside 5b. Insert handle from outside. Loosely assembly one hex nut. The handle should freely turn. Point the handle downward to begin the next step. 5c. Slip latch bar onto handle threads. Align “D” slot in latch bar with flat on handle threads. The latch bar should point toward the left. Assemble the second hex nut to finish the assembly. This hex nut functions as a “jam nut”, and will tighten against the first hex nut assembled in Step 5b. 5d. Tighten the “jam nut” with a wrench. 5e. Proper installation of the latch assembly. 8. Assemble chimney to dome with four small screws. NOTE: In some models, the chimney and dome are pre-assembled by the factory. 9. Lay the chimney screen in the chimney. 10. Place dome assembly onto fireplace frame. Coleman Warranty The Coleman Company, Inc. ("Coleman") warrants of original retail purchase, this product will Coleman, at its option, will found to be defective during the 1. Place unit on a level, noncombustible Keep well away from house, garage, balconies or eave overhangs. 2. Be sure chimney screen is in place and grate newspaper, kindling & wood on top of grate. 3. Ignite newspaper & kindling with match or butane 4. Once fire is lit, close and latch the screen door. 5. Screen door handle is hot when in use. Take care when opening and closing the screen door. After Use WARNING To avoid burns – use heavy gloves when handling hot surfaces. 1. Completely extinguish fire before leaving. 2. Do not use water to douse the fire as this may warp the firebowl. 3. Dispose of cold ashes properly. 4. Be careful – fire may be out but firebowl can still be hot. Handle carefully. 5. Store in covered enclosure. 6. Only place vinyl cover on unit after unit is completely cooled to touch. Repair Parts List Model Model DESCRIPTION 5055-707 5055-720 Part No. Part No. 5055-2001 5055-2001 Screen Assembly 5055-1001 5055-1001 Protective Cover 5055-1101 5055-1101 Top Ring 5055-1161 5055-1161 Chimney Screen 5055-4301 5055-4301 Hardware Kit 5055-1501 5055-1501 Leg Support Ring 5055-4001 5055-4001 Grates (2 pk) 5055-5001 5055-5001 Leg Assembly (1 pk) 5055-1511 5055-1511 Foot Pads...

Ce manuel est également adapté pour les modèles :
Cheminées - 5055-707 (311.8 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories