Évaluations - 3, GPA: 3
(
)
)
|
Facilité d'utilisation
Do NOT use gasoline, kerosene, diesel fuel, lighter fluid or alcohol to light or relight fires. Keep all electrical cords away from a hot fireplace. All surfaces of this outdoor fireplace are hot when in operation. To avoid burns, do NOT touch fireplace until it has completely cooled unless you are wearing protective gear (Potholders, gloves, BBQ mittens, hot pads & etc.). Never touch ashes or coals to see if they are hot. Do NOT leave a lit outdoor fireplace unattended, especially around children and pets. Do NOT attempt to move or store this outdoor fireplace until all ashes and coals are completely extinguished. Do NOT remove ashes or coals until they are completely and fully extinguished. Use heat-resistant gloves or hot pads when contacting handles. Use long, sturdy fireplace tools when adding or moving logs. Do NOT place wood directly into bottom of the outdoor fireplace. Place wood only on the wood grid. Do NOT overload the fireplace. Do not add additional firewood until the fire burns down. NOTICE: If any portion of the bowl, lid or spark guards of this outdoor fireplace are glowing red it is overloaded. Do NOT lean over this outdoor fireplace when lighting or when in use. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. Avoid breathing smoke from the fire and avoid getting it into your eyes. This outdoor fireplace should be thoroughly inspected and cleaned on a regular basis. After a period of storage and/or non-use, check for signs of damage and creosote build-up. Do NOT operate until necessary repairs and/or cleanup are executed. Use only Blue Rhino Global Sourcing, Inc factory authorized parts. The use of any part that is NOT factory authorized can be dangerous and will void your warranty. Please use protective gloves when assembling this product. Do not force parts together as this can result in personal injury or damage to the product. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Exploded ViewParts List 1 2 3 4 5 6 Spark Guard Handle Spark Guard Wood Grate Rail (4) Bottom Bowl Leg (3) 2 3 5 1 55-05-530 55-05-531 55-05-532 55-05-533 55-05-895 55-05-535 4 6 Hardware Tools Required for Assembly (Included) Allen Wrench A Screw M5x10 Black Nickel Plated Head 20 pcs B Screw M6x10 Black Nickel Plated Hex Head 9 pcs Nut M6 Black Nickel Plated 1 pc Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver Outdoor Fireplace Model No. WAD900SP Assembly Instructions 1 2 Attach Legs For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and model number available for reference. DO NOT RETURN PRODUCT TO STORE. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. Typical assembly: approximately 30 minutes. B x 9 3 A x 20 Attach Rails 4 Attach Handle C x 1 page no. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Operating Instructions 5 Insert Wood Grid and Spark Guard WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1. Make sure there is only a small amount of ash in the bottom of the bowl. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. 4. Use a match to light kindling or firestarter. 5. Using a hook and heat resistant gloves, replace spark guard once the kindling or firestarter is lit. Tending the Fire You may need to shift and/or add logs for an ideal experience. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 1. Using a hook and heat resistant gloves, carefully remove spark guard. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top coals. Be careful not to shift ashes. 4. Using a hook and heat resistant gloves, replace spark guard. Extinguishing 1. Allow fire to burn itself out. 2. Do NOT use water to extinguish as this is dangerous and...