Log:
Évaluations - 3, GPA: 3.7 ( )

Instructions Sony, Modèle TC-WE425

Fabricant : Sony
Taille : 199.8 kb
Nom Fichier : 3862714111.pdf
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


z To record with the optimum recording level • To prevent changes in the recording level after recording starts, press REC rwhile playing the highest sound level portion of the program source to be recorded. The result is a more natural-sounding recording. • If you play the entire program source after the AUTO indicator has stopped flashing and is lit continuously, the deck will set the recording level for the portion of the program source with the highest signal level. z Recording level setting remains even after the recording has ended After you have finished recording with the Auto Rec Level function, the AUTO indicator remains on and the recording level setting remains the same. To cancel the setting, do one of the following: • Press ARL to turn off the AUTO indicator • Turn REC LEVEL • Turn the deck off. Advanced Recording Operations Advanced Recording Operations Fading In and Out (Fader) You can gradually increase the recording level at the beginning of a recording (fade in) or gradually decrease the recording level at the end of a recording (fade out). It is convenient to use this function, for example, when the tape reaches to its end and you don’t want the track to be cut off abruptly. AUTO indicator FADER ¤¤ PRrp»a 0)0) p»a 0 1 2 3 4 5 6 7 8 9 10 To Do the following: Fade in 1 Follow Steps 1 to 4 of “Recording on a Tape” on page 6. 2 Press FADER. During fade-in, the AUTO indicator flashes. When the fade-in has completed, the AUTO indicator goes off. (The AUTO indicator lights continuously if the Auto Rec Level function is on.) Fade out Press FADER when you want to start fading out while recording. When the fade-out has completed, “REC” flashes in the display and the deck pauses. Note Fade-in or fade-out is not possible when REC LEVEL is set to 0 (minimum). Dubbing a Tape You can copy a tape in deck A to a tape in deck B at normal or high speed. ¤¤ Rr »a 0)0) p»a 0 1 2 3 4 5 6 7 8 9 10 »/ apHIGH/NORMALPAUSE PDIRECTION MODE 1 Insert the recorded cassette into deck A and a blank cassette into deck B. Make sure the record-protect tabs on the cassette in deck B have not been removed. 2 Select the side(s) to be recorded on. To record on Set DIRECTION MODE to One side A Both sides a. Recording on the reverse side on deck B starts independently of playback on deck A. RELAY. Recording on the reverse side on deck B starts simultaneously with playback of the reverse side on deck A. 3 Select the dubbing speed. To select Press HIGH/NORMAL Normal speed Once High speed Twice “HIGH” or “NORM” appears in the display. The tape deck changes to dubbing standby. 4 Select the side from which to start dubbing. To record from Press The front side · The reverse side . 5 Press PAUSE Pto start dubbing. To stop dubbing During Press Normal-speed dubbing pon deck B High-speed dubbing pon either deck (Continued) Advanced Recording Operations Advanced Recording Operations z During high-speed dubbing Only pis operative. z You don‘t have to adjust the recording level or select the Dolby NR system during dubbing Dubbing is automatically performed with the same recording level and Dolby NR system as the original in deck A. If, however, you want to monitor the sound during normal-speed dubbing, set DOLBY NR to match the tape in deck A (see page 5). z You can adjust the pitch of the playback on deck A (TC-WE525 only) See page 5. Note If a TV set is placed near the tape deck, noise may occur during high-speed dubbing. In that case, turn the television set off or move it away from the tape deck. Dubbing only specific portions You can do this only during the normal-speed dubbing. 1 Press p on deck A at the portion you want to skip. Deck B changes to recording pause. 2 Locate the point you want to resume recording on deck A, then stop the tape. 3 Press PAUSE Pto resume dubbing. Inserting a Blank Space During Recording (Record Muting) You can insert a blank space of 4 seconds between each track or erase unwanted portions on a tape. ¤¤ rp»a 0)0) p»a 0 1 2 3 4 5 6 7 8 9 10 PAUSE PREC MUTING Ra 1 Start recording. 2 Press REC MUTING Rwhere you want to insert a blank space. “REC” flashes in the display and a blank is recorded on the tape. After 4 seconds, Plights up and the tape deck changes to recording pause. 3 Press PAUSE Por ato resume recording. z If you want to insert a blank space longer than 4 seconds Hold down REC MUTING R as long as you want. After 4 seconds, “REC” flashes faster. When you release REC MUTING R, Plights up and the tape deck changes to recording pause. Press PAUSE Por ato resume recording. Advanced Recording Operations Advanced Recording Operations Synchro-Recording With a CD Player Through a Monaural (2P) Mini-plug Cord (TC-WE525/ WE425 only) By pressing SYNCHRO, you can perform synchrorecording on your tape deck with a Sony CD player connected to the CONTROL A1 connector through an optional monaural (2P) mini-plug cord (connecting cord for CONTROL A1) (see page 4). The monaural (2P) mini-plug cord supports advanced fu...

Ce manuel est également adapté pour les modèles :
platines cassette - TC-WE525 (199.8 kb)
platines cassette - TC-WR681 (199.8 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories