Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
• Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted. • The appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. • Young children should be supervised to ensure that they do not play with the appliance. • It is recommended to regularly inspect the appliance. Do not use the appliance if power supply cord, plug or actual appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville service centre for examination and/or repair. IMPORTANT SAFEGUARDS • Carefully read all instructions before operating and save for future reference. • To protect against electric shock, do not immerse the grinder, plug or cord in water or any other liquid. • Remove any promotional stickers or packaging materials before using the coffee grinder for the first time. • Do not place the appliance near the edge of a bench or table during operation. Always use the appliance on a dry, level surface. • Always turn the appliance off, switch the power off at the power outlet and then remove the plug when the appliance is not being used and before cleaning. • The Coffee Grinder should not be switched on until the bean container and lid are locked into position in the Grinding Chamber. • Do not leave the appliance unattended when in use. • Do not move the grinder whilst in operation. • Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven. SAVE THESE INSTRUCTIONS 4 • This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. • The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice. 5 • Do not use on metal surfaces, for example, a sink drain board. • Do not use on an inclined surface. • Do not operate this appliance for longer than 2 minutes at a time as this could cause overheating. Allow to cool for at least 2 minutes after each use. Allow appliance to cool down for 10-15 minutes after long operation. • Keep the appliance clean. Follow the cleaning instructions provided in this book. • Avoid contacting moving parts • The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. • Check Hopper for presence of foreign objects before using. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Operating your Breville Conical Burr GrinderKnow your Breville Conical Burr Grinder BR8023 BCG450XL Book Amend 24/8/06 3:36 PM Page 6 BR8023 BCG450XL Book Amend 24/8/06 3:36 PM Page 6 Removable bean container holds up to 250g of coffee beans Stylish stainless steel design Removable ground coffee container Tidy cord storage Non-slip feet 6 Easy lift off lid with transparent window Grind selector control with suggested coffee style settings Conical burr grinder Touch activated start/stop button Timer selector dial Power on/off switch Before first use Before first use, remove any promotional stickers or packaging material attached to your coffee grinder. 1. Remove the Bean Container, Bean Container Lid and Ground Coffee Container and wash in warm soapy water with a soft cloth. Rinse and dry thoroughly. Before each use, ensure Grinder Bowl and Ground Coffee Container are clean and empty. 2. Place Bean Container into Grinding Chamber with ‘Align’ arrow symbol on the Bean Container aligning with the ‘Align’ arrow symbol on top left- hand side of the Grinder Base. Turn the Bean Container clockwise to lock into position. 3. Measure the desired quantity of whole coffee beans or spices directly into the Bean Container and cover with lid. 4. Plug the Grinder into a 110v power outlet and switch on. 5. Rotate the Bean Container to select the desired fineness of grind by aligning one of the following selections to the white marker on the front panel of the Grinding Base; COARSE – Percolator MEDIUM – Plunger FINE – Filter EXTRA FINE – Espresso SUPER FINE – Turkish 6. Rotate the Timer Selector Dial (marked as number of cups) to select the desired grinding time. 7. Press ON/OFF button on the right-hand side of the Grinder Base to the ‘ON’ position, then press the ‘START’ button on the front of the Grinder Base to begin grinding. The Coffee Grinder will begin grinding the coffee/spices d...