Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
2). • Plug in machine. 6a. FILLING THE WATER TANK Please note: Only use fresh, cold water. Never fill water tank with carbonated water, milk or any other liquid. • Remove the water tank (Fig. 7), rinse and fill with cold water. • Replace water tank and make sure that it engages securely. We recommend to fill the water tank each day with fresh, cold water. This will improve the flavor of your coffee. 6b. FILLING THE BEAN CONTAINER Please note: To ensure that the conical burr grinder continues to function properly, please avoid using any kind of coated or flavored beans (all coating and flavors contain sugar or sugar substances). Such coating can damage the burrs. Using such beans voids the warranty. Have your coffee store grind the sugar coated beans and use as described in chapter 9f. Flavored Coffee: If you like flavored coffees we recommend adding flavors to your coffee after brewing. This way you can use your regular coffee beans in the bean container. Adding the flavors after brewing lets you control the flavor intensity much better than with pre-flavored coffee. Your local coffee store typically carries a variety of liquid flavors. Frozen Beans: Thaw 3 to 4 hours before adding to bean container. This prevents moisture from seeping into the grinder. Oily Beans: Beans with an oily surface tend to stick together. This may prevent a continuous flow of beans from the bean container into the burrs. As a result the grinder does not grind enough coffee and you might get weak or no coffee at all. Stir the beans in the bean container just before grinding. Alternatively, you can also pour the beans into an open bowl and let them sit for about 5 hours. The oils will evaporate (this will not change the taste of your coffee). Then fill the beans into the bean grinder. Now beans will feed into the burrs more easily. • Open the lid for the bean container and remove the Aroma Protection Lid. • Make sure the bean container is empty and clean. Fill beans into the bean container (Fig. 5). 6c. TURNING THE MACHINE ON FOR THE FIRST TIME Make sure bean container and water tank are filled. • Switch the Main Power Switch (Fig. 1a) in the back of the 11. machine. The “ON” symbol (Fig. 3) illuminates, indicating that the main power switch is on. • Push the DIAL to turn the machine on. The SELECTOR light starts blinking (Fig. 4). • Place a cup underneath the frother (Fig. 1,12). • Turn the SELECTOR counterclockwise to the Water symbol (Fig. 4). The machine will dispense a small amount of water through the frother into the cup. During this time the SELECTOR light is on. The water flow stops automatically. The SELECTOR light starts blinking again. • Turn the SELECTOR clockwise to the Cup symbol. The light turns off. • The machine heats up indicated by the blinking RINSE symbol (Fig. 3). • When it stops blinking and is illuminated, place a large cup (8 oz.) under the coffee spouts (Fig. 1,1) and push the DIAL. The machine will rinse and pre-warm the coffee spouts with warm water. During this time the RINSE symbol blinks. After a few seconds the flow of water will stop automatically. All eight symbols around the DIAL are now visible (Fig. 3). • The 1-cup Espresso symbol is highlighted. • Push the DIAL. The 1-cup Espresso symbol starts blinking, and the grinder starts grinding beans. The left DIAL light illuminates and the machine brews a first cup of coffee. It will stop automatically. • Discard the first two cups of coffee. Please note: It is possible during the preparation of just the first cup of coffee that the MESSAGE light (Fig. 3) blinks and no coffee will be produced. The machine has not detected enough ground coffee at this time. (When you open the Access Door (Fig. 1,2a) the FILL BEANS light blinks (Fig. 3a). • Just push the DIAL again to brew another cup of coffee. Important: After the brewing stops, the machine will discard the used coffee grounds into the internal used coffee coffee container (Fig. 2). Please do not try to pull out the drawer (Fig. 17-19) during coffee preparation. It can seriously damage the machine. There is no need to pull out the drawer until the machine prompts you (see chapter 6c). Important: Do not remove drawer unless the C5 prompts you (chapter 16b). If you pull out the drawer, you must empty the used coffee container (Fig. 2,19). Otherwise too much used coffee will clog the machine and cause damage. Recommendation: With the 1-cup Espresso symbol highlighted and the other seven symbols dim, turn the DIAL slowly clockwise and see how the other symbols will be highlighted. This is how you select any of the other functions. 7. ADJUSTING THE GRINDER You can adjust the grinder to the roast of your coffee. We recommend the following: Light roast: use a finer adjustment. Dark roast: use a coarser adjustment. • Open the lid of the bean container (Fig. 1,9). • While the grinder is running turn the grind selector to the desired position (Fig. 6). – The smaller the dots, the finer the grind. – The bigger th...
Ce manuel est également adapté pour les modèles :Cafetières - IMPRESSA 69005 (258.95 kb)