Évaluations - 5, GPA: 3.4 ( )

Fabricant : AEG Taille : 240.37 kb Nom Fichier : Langue d'enseignement:

This carbon filter helps to remove the majority of such elements as chlorine from tap water that might otherwise spoil the flavour. This allows the full flavour of your coffee to develop. Inserting and Changing the Carbon Filter (Figure 4) 0 Remove the carbon filter provided from its plastic packaging and rinse thoroughly under running water. 0 Raise the lid above the water tank (Figure 1/A). 0 Insert the carbon filter (Figure 3/B) in the filter holder (Figure 3/C). Ensure that the carbon filter is fully and correctly in place! 0 Attach the filter holder handle (Figure 3/A) firmly to the filter holder (Figure 3/C). 0 Insert the complete carbon filter system into the recess in the water tank (Figure 4). The tap water will be filtered during the brewing procedure. Please note that the carbon filter must be replaced either after 60 brewing procedures or after 6 weeks (whichever is the sooner) so that the filtering will continue to be effective. The old carbon filter cannot be cleaned and must be replaced with a new one. Important: Regardless of how frequently the coffee machine is used the carbon filter must be changed the latest after six months to avoid a build up of bacteria in the filter. Spare Parts/Accessories New carbon filters may be obtained from a specialist dealer (E No. 900 084 952) or from your nearest AEG customer service centre (ET No. 900 084 952/2). If the coffee jug is broken, a replacement may be ordered from customer service under the following order numbers: – Coffee jug, colour caramel, ET No. 400 606 677/5 for KF 2060 – Coffee jug, colour blue, ET No. 400 606 680/9 for KF 2061 – Coffee jug, colour black, ET No. 400 607 614/7 for KF 2062. Cord Compartment (Figure 5) Your coffee machine has a cord compartment. Surplus cord may be stored in the base of the casing. Before Using for the First Time Before brewing coffee for the first time, you should carry out one or two brewing procedures with water only, but with the full quantity of water: 1. to clean the coffee machine; 2. a new carbon filter will discolour the water on the first run through. This does not, however, affect the flavour of the coffee. 0 Fill the fresh water container to the top cup marking with cold water. 0 Switch the appliance on and allow the water to run through into the coffee jug. Do not use ground coffee or a filter paper. 0 Throw away the water that has run through. g Making Coffee Switching the Appliance On (according to model) Filling with water (Figure 6) 0 Raise the lid above the water tank (Figure 1/A). Fill the water tank with clear, cold tap water. Never use hot water. Please do not put milk, prepared coffee, tea etc., into the water tank. You can use the coffee jug to pour in the required amount of water. The water level gauge is on the outer side of the water tank (Figure 1/D). The markings apply to the quantity of fresh water. The amount of coffee produced will be less as the ground coffee absorbs water. 0 Close the water...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :