Évaluations - 5, GPA: 4.2
(
)
)
|
Facilité d'utilisation
Do not attempt to repair the appliance yourself, otherwise your guarantee becomes invalid. Caution -Do not place the appliance on a hot surface and prevent the mains cord from coming into contact with hot surfaces. -Unplug the appliance if problems occur during grinding or brewing and before you clean it. -The jug is hot during and after brewing. Always hold the jug by its handle. -Never use the jug in a microwave oven. -Do not move the appliance while it is operating. -Wait until the appliance has cooled down before you store it.The hotplate and the coffee jug may be hot. -After you have unpacked the appliance, make sure it is complete and undamaged. If in doubt, do not use the appliance but contact the Consumer Care Centre in your country. -This appliance is intended for normal household use only. It is not intended for use in environments such as staff kitchens of shops, offices, farms or other work environments. Nor is it intended to be used by clients in hotels, motels, bed and breakfasts and other residential environments. electromagnetic fields (eMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Before first use Flushing the appliance You need to flush the coffeemaker once before first use. 1 Put the mains plug in the wall socket. EnglisH 2 water up to the 10-cup indication. , Set the on/off switch on the back of the appliance to ‘I’ to switch on the appliance. The start/standby button and the display light up. If you do not press any button within 1 minute, the appliance goes into standby mode. In this case, the display goes out and only the start/standby button stays on to indicate that the appliance is still switched on. In standby mode, you can press any button to reactivate the appliance. 3 Open the water reservoir lid. Fill the water reservoir with fresh cold Note: Do not put coffee beans or ground coffee in the appliance. 4 Close the water reservoir lid. 5 Place the jug on the hotplate. Note: Make sure the jug lid is in place.Without the jug lid, the drip stop function is activated automatically (see chapter ‘Using the appliance’, section ‘Drip stop function’). Note: Make sure you put the jug on the hotplate with the spout facing into the appliance. 6 Press the start/standby button. 7 Press the pre-ground coffee button to switch off the grinder. The button lights up when you press it. , Note:When you switch off the grinder, the number of cups and the strength setting are not shown on the display. 8 9 ,8 9 , EnglisH Press the start/standby button to start the brewing process. Let the appliance operate until all the water has flowed into the jug. The coffeemaker produces 5 beeps when the brewing process is finished. 10 Press the start/standby button to stop the brewing/ keep-warm process. 11 Empty the jug. using the appliance Filling the water reservoir 1 Open the water reservoir lid and fill the water reservoir with the required amount of cold water. There are indications for 2 to 10 cups (275ml to 1375ml) on the water level window and on the jug.You can use these indications to determine how much water to put in the water reservoir. Keep in mind that the amount of brewed coffee will be slightly less, since ground coffee absorbs water. Tip: Use the jug to fill the water reservoir with the required amount of water. Note: Do not fill the water reservoir beyond the 10-cup indication, otherwise water spills from the opening at the back. using coffee beans Always keep the water reservoir lid closed when you fill the coffee bean container with coffee beans. Otherwise coffee beans can fall into the water reservoir and block up the water inlet. 1 Press the OPEN button on the right side of the appliance to open the filter basket holder. 2 Place a paper filter (no. 4) or the permanent filter in the filter basket to collect the ground coffee. 3 Remove the coffee bean container lid (1) and fill the container with coffee beans (2). Make sure there are enough coffee beans in the container for the amount of coffee you want to brew. Note: Always make sure the bean container is at least half full. The maximum capacity of the coffee bean container is 250g. To prevent the grinder from jamming, do not exceed this amount. To prevent the grinder from jamming, do not use unroasted or caramelised beans. 4 Turn the grind selection knob to select the desired type of grind (from fine to coarse). There are nine grind settings. 5 To select the number of cups, press the 2-10 cups button as many times as the desired number of cups. ,, The 2-10 cups button lights up when you press it. ,, The selected number of cups appears on the display. ,, The grinder grinds the required amount of coffee beans. Note: Make sure that the number of cups you select with the 2-10 cups button is consistent with the amount of water in the water reservoir. ...
Ce manuel est également adapté pour les modèles :Cafetières - 00 (11.63 mb)