Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 1.09 mb Nom Fichier : Langue d'enseignement:

• 6 • Coff ee bean hopper lid Grinder adjustment key Power cord Brew group lubricant Double coff ee light and brewed coff ee length setting Temperature light Water tank level light Warning light Small coff ee button Large coff ee button Control dial ON/OFF button Pannarello (optional - only available for certain models) Brew group Dregdrawer Service door Coff ee bean hopper Dispensing spout Grill Full drip tray indicator Drip tray Water tank Hot water/steam wand Protective handle Control panel • 7 • English INSTALLATION For your safety and the safety of others, carefully follow the instructions provided in the “Safety Regulations” section. Machine Packaging The original packaging has been designed and constructed to protect the machine during transport. We recommend keeping the packaging material for possible future transport. Preliminary Operations • Remove the coff ee bean hopper lid and the drip tray with grill from the packaging. • Remove the coff ee machine from the packaging and position it in a place that meets the requirements described in the “Safety Regulations”. • Place the drip tray with grill into its appropriate seat on the machine. Make sure it is fully inserted to its limit stop. • Replace the coff ee bean hopper lid. Note: Insert the plug into the socket only when indicated and check that the ON/OFF button is not pressed. Important Note: Carefully read the explanations of all the warnings displayed by the machine to the user by means of the lights on the control panel (see section “Control Panel Lights”). NEVER remove the drip tray when the machine is turned on. Wait a couple of minutes after turning on/off , since the machine will carry out a rinse/self-cleaning cycle (see section “Rinse/Self-Cleaning Cycle”). MAX MIN • Remove the water tank. • Rinse and fi ll it with fresh water making sure that it is not fi lled exceeding the MAX level indicated in the water tank. Put the water tank back in its seat to its limit stop. Use only fresh, non-sparkling water to fill the tank. Hot water or any other liquid may damage the tank and/or the machine. Do not turn on the machine when the tank is empty: Make sure there is enough water in the tank. • Remove the coff ee bean hopper lid. Note: The hopper may be fitted with different safety features according to the regulations of the country of use of the machine. • Slowly pour the coff ee beans into the hopper. Only coff ee beans must be put into the coff ee bean hopper. Ground coffee, instant coffee or any other object may damage the machine. • Replace the lid on the coff ee bean hopper. • Insert the plug into the socket located on the back of the machine. • Insert the plug of the other end of the power cord into a wall socket with suitable power voltage. • 8 • • Make sure control dial is on “ ” position; if this is not the case, set it to that position. • Simply press the ON/OFF button to turn the machine on; the “ “ light will begin to blink rapidly indicating that the water circuit must be primed. Note: Before starting the machine for the first time, prime the water circuit. Using the machine for the first time or after a long period of inactivity. These simple operations will make it possible to always brew excellent coff ee. They have to be performed: A) At fi rst start-up. B) When the machine remains inactive for a long time (more than 2 weeks). Dispensed water must be emptied into an adequate drain. It is not suitable for food use. 1 Place a container under the dispensing spout. 2 Before starting the procedure, check that the “ “ light is steady on. Priming the Water Circuit • To prime the water circuit, place a container under the hot water / steam wand. • Turn the control dial clockwise to set it to the “ ” position and wait. When water steadily comes out and the “ “ light will blink slowly - indicating that the knob can be turned off - rotate the control dial counter-clockwise to set it back to the “ ” position. • At this point the “ “ light begins to blink slowly, indicating that the machine is in warm-up mode. When warm-up is complete, the machine performs a rinse cycle of the internal circuits. • When the above steps are complete, check that the “ “ light is on steady. The machine is now ready for use. • To brew coff ee, dispense hot water or steam, and for a proper use of the machine, carefully follow the instructions provided. 3 Brew one coff ee. Press and release the “ “ button. The machine starts brewing coff ee. 4 Wait until brewing is complete and remove the container. 5 Place a container under the steam wand (Pannarello, if supplied). 6 Turn the selector switch clockwise to the “ ” position. 7 Dispense water until the no water signal is displayed. The “ ” light remains steady on. Now turn the selector switch counterclockwise to set it back to the “ ” position. 8 At the end, fill the water tank again. Then the products can be brewed as described in the following sections + Blinking Steady on + Blinking Steady on • 9 • Rinse/Self-Clea...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :