Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Ser vicing / Maintenance In case of failure, problems or a fault resulting from a suspected fall of the machine, you should immediately remove the plug from the socket. Never attempt to operate a faulty machine. Servicing and repairs may only be carried out by authorized service centers. All liability for damage resulting from work not carried out by professionals is declined. Fire Safety Precautions In case of fire, use carbon dioxide (CO2) extinguishers. Do not use water or dry powder extinguishers. Key to machine components (Page 2) 1 Water tank 2 Power button 3 Power light 4 Brew button 5 Machine ready light 6 Steam button 7 Hot water / steam knob 8 Brew unit 9 Steam wand (Pannarello frother) 10 Power cord 11 Drip tray + grill 12 Full tray indicator 13 Cup stacking sur face 14 Portafilter 15 Ground coffee fi lter basket (for one or two coffees) 16 Ground coffee measuring scoop 17 Pod adapter 18 Pod filter 4 MACHINE INSTALLATION For your safety and that of others, follow the "Safety Regulations" in section 3 carefully. 4.1 Packaging The machine's original packaging has been designed to protect it during transportation. We recommend keeping the packaging carton for possible future transportation. • 16 • 4.2 Installation Instructions Before installing the machine, read the following safety instructions carefully. • Place the machine in a safe place; • Make sure children cannot play with the machine; • Do not place the machine on hot surfaces or near open flames. The coffee machine is now ready to be connected to the power supply. 4.3 Machine Connection Electric power may be very dangerous! It is therefore necessary that the safety regulationsbe carefully respected. Do not use faulty power cords! Faulty cords and plugs must be replaced immediately in authorized customer service centers. The voltage of the appliance has been pre-set by the manufacturer. Check that the voltage matches the references on the label, at the bottom of the appliance. • Make sure that the power button (2) is not pressed before connecting the machine to the power supply. • (Fig.4A ) - Insert the plug into the socket on the back of the machine. • Insert the plug of the other end of the cable into a wall socket with suitable power voltage. 4.4 Water Tank • (Fig.1) - Remove the water tank (1). Be careful not to damage the water suction tube. • (Fig.2) - Rinse and fill it with fresh drinking water, taking care not to overfi ll it. • (Fig.3) -Re-insert the tank into its seat and re-position the water suction tube. Fill the tank with only fresh, non-sparkling, drinking water. Hot water or any other liquidmay damage the tank. Do not switch on the machine with empty tank: Make sure there is enough water inthe tank. 4.5 Priming the Water Circuit Before starting up the machine, after a long period of inactivity and whenever the tank is empty, the machine’s water circuit must be primed. • (Fig.4B) - Press the power button (2). The power light (3) will turn on. • (Fig.5) - Place a container under the steam spout. Open the hot water/steam knob (7) by turning it counterclockwise. • (Fig.6) - Press the brew button (4). • Wait until a steady jet of water flows out of the steam spout (Pannarello). • Press the brew button (4) again. Close the hot water/ steam knob (7) by turning it clockwise (Fig.7). Remove the container. The machine is now ready to brew coffee and dispense steam. Please see related sections for operating details. 5 COFFEE BREWING Wa r n in g! N eve r r e m ove t h e p o r t a f il t e r bymanually turning it clockwise while coffee isbrewing. Danger of burns. • During this operation the machine ready light (5) may flash. This should be considered normal. • Before using the machine, make sure that the hot water/ steam knob (7) is closed and that there is enough water in the tank. • (Fig.4B) - If the machine is off, switch it on by means of the power button (2). The power light (3) will illuminate. • Wait until the machine ready light (5) comes on. The machine is now ready to brew coffee. 5.1 Using Ground Coffee • (Fig. 8A) - Insert the ground coffee filter basket (15) into the portafi lter (14). • (Fig. 10) - Insert the portafilter into the brew unit from the bottom (8). • (Fig.11) - Turn the portafilter to the right, until it locks into place. Release the portafilter grip. The handle will slightly turn to the left. This movement ensures the portafilter's performance. • (Fig.13) - Preheat the portafilter by pressing the brew button (4) until some water pours out of the portafi lter. This operation is only necessary for the fi rst coffee. • After some water has fl owed out, press the brew button (4) again to stop hot water dispensing. • (Fig.15) - Remove the portafilter from the machine by turning it from right to left and drain any water remaining in the portafilter. As the machine is fitted with the special portafilter (14), there is no need to change the fi lter when making one or two coffees. • (Fig.8B) - Add 1 or 2 scoops of ground...
Ce manuel est également adapté pour les modèles :Cafetières - 10002768 (4.72 mb)