Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 3.45 mb Nom Fichier : Langue d'enseignement:

-If you intend to make another cup of coffee later, just leave the pod coffee machine switched on.The machine automatically switches off after 30 minutes. EnglisH 11 Filling the water reservoir 1 Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine. Never pour milk, coffee, hot water or carbonated water into the water reservoir. The MIN indication on the water reservoir indicated the minimum amount of water required for brewing coffee. Always fill the water reservoir beyond the MIN level. switching on the machine Put the plug in an earthed wall socket. , , Press the on/off button 3. The light ring flashes slowly while the water heats up. Heating uptakes approx. 75 seconds. The pod coffee machine is ready for use when the light ring lights up continuously. 1 2 Note: If the light ring flashes rapidly, the water reservoir does not contain enough water for brewing one cup of coffee. Placing a pod holder 1 Release the lid by moving the lever upwards. The lid opens automatically. ,2 Place the appropriate pod holder in the machine. Note: Make sure the pod holder is clean and the sieve in the centre is not clogged, e.g. with loose coffee grounds. -If you want to make one cup of coffee, use 1 coffee pod in combination with the 1-cup pod holder qand the 1- cup button q. 12 EnglisH -If you want to make two cups of coffee, use 2 coffee pods in combination with the deeper 2-cup pod holder qqand the 2-cup button qq. Placing one or two pods 1 Place the coffee pod(s) properly in the centre of the pod holder, with the convex side pointing downwards. Note: Use coffee pods from Namyang specially designed for your pod coffee machine for a full and round taste. Note: Make sure the coffee in the pod(s) is evenly distributed and press the pod(s) lightly into the pod holder. Note: Never put normal ground coffee or use torn pods in the machine, as this causes it to become blocked. -Place 1 coffee pod in the 1-cup pod holder q. -Place 2 coffee pods in the 2-cup pod holder qq. 2 Close the lid and lock the lever. Make sure the lid is closed properly and the lid lever is locked before you start brewing coffee. EnglisH 13 3 Place one cup or two cups under the spout openings.You can adjust the height of the coffee spout by sliding it upwards or downwards. The cups you use should have a capacity of at least 150 ml. Do not use cups that are too large, as they cause the coffee to get cold more quickly. 4 Press the button indicating the number of cups of coffee you want to brew. -Press the 1-cup button q for one cup. -Press the 2-cup button qq for two cups. The pod coffee machine starts brewing. -The machine automatically supplies the optimal amount of water. -You can interrupt the brewing process at any time by pressing the on/off button 3. If you switch the machine back on after having interrupted the brewing process, the machine does not complete the interrupted brewing cycle. Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air.When this happens, the next cup is only partly filled. Note: If no coffee comes out of the machine, you have not ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :