Log:
Évaluations - 2, GPA: 4.5 ( )

Instructions Black & Decker, Modèle DCM100BC

Fabricant : Black & Decker
Taille : 1.03 mb
Nom Fichier : DCM100BC,DCM100WC1066.pdf
Langue d'enseignement: enfr
Aller à la télécharger



Facilité d'utilisation


. . . . . . . . . A 1. One-piece water reservoir and brew basket cover 2. Water showerhead 3. Guide 4. Water reservoir 5. Water level window 6. Control panel 7. “Keep Hot” carafe plate †8. 12-cup/60 oz. (1774 ml) carafe with brew-thru lid (Part # DCM100B-01 (black), DCM100W-01 (white)) †9. Removable filter basket (Part # DCM100B-02 (black & white)) †Consumer replaceable/removable parts 3 How to Use This product is for household use only. GETTING STARTED • Remove all packing material, and any stickers from the product. • Remove and save literature. • Wash all removable parts as instructed in CARE AND CLEANING section of this manual. • Open water reservoir/brew basket cover and pour fresh cold water up to 12-cup level mark into the water reservoir (B). • Place empty 8-12 cup basket style paper filter into removable filter basket. • Place basket into brew basket with the handle to the right (C). • Close water reservoir/brew basket cover. • Place lid on carafe. • Place empty carafe on the “Keep Hot” carafe plate. • Pull power cord out from power cord holder in back of coffeemaker and plug into standard electrical outlet. • Brew water through appliance following the BREWING COFFEE instructions, without adding coffee grounds. This removes any dust or residue that may remain in the system during the manufacturing process. • Discard the water from the carafe and paper filter from filter basket. • Turn off the appliance, unplug and allow it to cool down. ADJUSTING THE POWER CORD LENGTH You can adjust the length of the power cord to suit your needs. To increase the length of the power cord, simply grasp the cord (not the plug) at the rear of the coffeemaker and gently pull down and out of the slot, away from the coffeemaker. To decrease the length of the power cord, simply feed any excess cord into the slot at the rear of the coffeemaker. Lift the cord and lock it into the slot when cord is at desired length. SETTING THE CLOCK 1. Plug appliance into standard electrical outlet. 2. The digital clock display flashes 12:00 (D). Note: You must set the clock in order to use the delayed brewing feature. B C 12:00 D 4 3. To change the time: Press HOUR (HR) button until the correct time appears (E). Note: When the time passes noon, a small light appears in the top left corner of the digital display under the P.M. to let you know you are in P.M. time. If the P.M. indicator is not lit, the time is set to A.M. 4. Repeat with the MIN button (F). (If minute setting is not changed within 5 seconds, the clock will revert to default time and selection of hour and minute must be repeated.) Tip: Hold each button down to make the hours and minutes change rapidly after a short delay. To change the time in 1 minute increments, press and release the button. Note: If the unit is unplugged or power is interrupted even momentarily, the time may need to be reset. BREWING COFFEE It is not necessary to set the clock to brew coffee unless you wish to use delayed brewing. 1. Open water reservoir/brew basket cover. 2. Fill water reservoir with desired amount of cold tap water using water markings on side of reservoir. Do not exceed the 12-cup maximum level (G). Caution: Be careful not to exceed the 12-cup maximum level, to avoid water running out the overflow hole in the back of the coffeemaker. 3. Place an 8-12 cup basket style paper filter into the removable filter basket, making sure filter is centered in filter basket. 4. Add desired amount of ground coffee. 5. Insert filter basket into brew basket following directions in GETTING STARTED. 6. Close brew basket/ water reservoir cover. 7. Place brew-thru lid on empty carafe. Note: Coffee may overflow if brew-thru lid is not properly aligned. 8. Place empty carafe on the “Keep Hot” carafe plate. 9. Plug cord into standard electrical outlet. 10. Press I/O button (H); power light is illuminated. Brewing begins OR, to delay brewing, you may set the auto function (see for DELAYED BREWING). 11. When coffee stops flowing into carafe, the brew cycle is complete. 12. Once coffee grounds have cooled carefully open reservoir/brew basket cover and using filter basket handle, remove and discard used grounds and paper filter. Close reservoir/brew basket cover. 13. The coffeemaker will keep brewed coffee hot for 2 hours and then automatically turn off. 14. To turn off the coffeemaker press the I/O button. 15. Unplug appliance when not in use. SNEAK-A-CUP® INTERRUPT FEATURE The Sneak-A-Cup® interrupt feature allows you to pour a cup of coffee from the carafe while the coffee is still brewing. When the carafe is removed, the brewing process is paused. Simply replace the carafe on the carafe plate within 30 seconds and brewing will resume. Note: If the carafe is not replaced within 30 seconds the brew basket may overflow. DELAYED BREWING 1. Follow steps 1 through 9 under BREWING COFFEE. 2. Make sure clock has been set to correct time of day (see SETTING THE CLOCK). 3. Press the PROG button; the AUTO light blinks. 4...

Ce manuel est également adapté pour les modèles :
Cafetières - DCM100WC (1.03 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories