Évaluations - 4, GPA: 3.8 ( )

Fabricant : Antec Taille : 105.14 kb Nom Fichier : Langue d'enseignement:

This PSU is very efficient, which reduces power consumption by up to 25% and saves you money on your electricity bill. EarthWatts power supplies have achieved 80 PLUS® Certification, the latest independent standard in PSU efficiency. In addition EarthWatts includes a variety of protective circuitry: OPP (over power protection), OVP (Over Voltage Protection), and SCP (Short Circuit Protection). EarthWatts also includes Universal Input with Active Power Factor Correction (PFC). Universal Input allows you to connect your Antec EarthWatts PSU to any AC power outlet between 100~240V without having to worry about setting a voltage switch. Active PFC reduces electrical waste by improving the power factor value to the PSU, helping the power plant to provide power to users more efficiently. Installation: This PSU is backwards compatible to previous ATX specifications. To make sure you connect your PSU properly, please refer to the user manual supplied with your motherboard and peripherals before connecting the EarthWatts to any of your devices. Picture 2 Picture 3 1. Connect the 24-pin main power connector. If your motherboard uses a 20-pin connector, detach the 4-pin attachment on the 24-pin power connector (see pictures 2 and 3). Note: the detachable 4-pin motherboards motherboards section cannot be used in place of the 4-pin +12V connector. 2. Connect the 4-pin or 8-pin +12V connector as needed for your motherboard. 3. You will find 2 cables with 4-pin Molex connectors. Connect this connector to any of your peripherals that use Molex connectors. Repeat as necessary. 4. There are 2 cables with SATA connectors. Connect this connector to any of the SATA hard drives in your system. Repeat as necessary. 5. There are two connectors for PCI Express graphic cards. They are labeled PCI-E on the connector. Connect these to your PCI Express graphic card if needed. Note: Please consult the user manual supplied with your PCI Express graphic card for detailed usage instructions. 6. If you have a floppy drive, you will find the correct power connector at the end of one of the cables with 4-pin Molex connectors. Connect the female floppy power connector to your floppy drive. 7. Connect the power cord to the PSU. NeoPower 550 Power Supply (Sonata Plus 550 Model Only) The NeoPower 550 PSU installed in the Sonata Plus 550 supports the newest ATX12V version 2.2 specification. This PSU includes Universal Input and Active Power Factor Correction (PFC). Universal Input allows you to connect your NeoPower PSU to any AC power outlet between 100~240V without having to worry about setting a voltage switch. Active PFC improves the power factor value of the PSU by altering the input current wave shape, helping the power plant provide power to users more efficiently. Also included are a variety of industrial-grade protective circuits: OPP (over power protection), OVP (over voltage protection), SCP (short circuit protection), and UVP (under voltage protection). For 24-pin For 20-pin 4 Special Quiet Computing Fan Operation NeoPower power supplies feature an innovative design that decreases noise during normal use, but which allows for superior cooling capabilities as loads increase. Owing to its ultra high efficiency and low heat generation, NeoPower can utilize an 80mm exhaust fan that rotates slowly and quietly to blow hot air out of the PSU, speeding up as heat increases. Advanced Cable Management System NeoPower power supplies feature Antec’s Advanced Cable Management System. It allows you to use only the power cables that you need, thereby reducing clutter and improving airflow inside your case. Inside the package, apart from a power cord, you will find the following cables: (see picture 1) Picture 1 Attached to the power supply, you’ll find the following: 1. Five 6-pin output sockets, for use with the wire sets to power your drives and other peripherals. 2. 4-pin and 8-pin +12V connectors. 3. A 24-pin configurable main power connector with detachable 4-pin section for 20-pin applications. Advanced Cable Management Wire Set (Modular Cables) 4. One Y-adapter with one standard 4-pin Molex peripheral connector at one end and two female Floppy power connectors at the other end. 5. Two sets of wires with a 6-pin PCI Express graphic card connector at one end and a 6-pin PSU connector at the other end. 6. Two sets of wires with three standard 4-pin Molex peripheral connectors at one end and a 6-pin PSU connector at the other end. 5 7. Two sets of wires with two SATA drive connectors at one end and a 6-pin PSU connector at the other end. Note: The SATA connectors include a +3.3V output so you can power the latest SATA devices. Modular Cables: # Quantity Part Name Description 1-3 1 Power supply Includes 24-pin main connector and a 4+4-pin +12V connector 4 1 14 cm Molex to Floppy connectors w/cable Includes one Molex and two floppy connectors 5 2 60 cm PCI Express connector w/cable Includes one PCI Express connector 6 2 77 cm Molex connector w/cable...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :