Évaluations - , GPA: ( )

Instructions Black Box, Modèle LTD8B

Fabricant : Black Box
Taille : 1.54 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Place this loop through the small hole at the front of the divider (Figure 4-5). Now place the plug end of the wire through the loop (Figure 4-6). Pull the end of the cable, tightening the loop (Figure 4-7). Chapter 4: Configuration and Setup LTD5 Figure 4-5. Create a loop from the power cable and feed it through the hole at the top front of the divider. Figure 4-6. Insert the plug end of the wire through the loop. Keep the loop on top Figure 4-7. Pull the cable taught to secure the loop. Step 5. Wrap the remaining length of power cord around the power brick (see Figure 4-10, page 12). Chapter 4: Configuration and Setup LTD5 Step 6. Wrap the plug wire around the brick. Leave at least 7" of extra cable if the divider will be inserted into the bottom shelf, or at least 21" of extra cable if the divider will be inserted into the top shelf. Lower shelf: 7" Upper shelf: 21" Figure 4-8. Wrap the remaining electrical cable around the power brick. Step 7. Hold the brick and cords in place by strapping them down using a zip tie or a hook-and-loop tie. Strap Figure 4-9. Strap the brick and cord in place using a zip tie or hook-and-loop tie (not included). Chapter 4: Configuration and Setup LTD5 Step 8. Install the assembled divider into the cart using the following steps. Figure 4-10. A divider with a power brick properly attached. NOTE: For proper installation, make certain that all power bricks are installed on the same side of every divider. Chapter 4: Configuration and Setup LTD5 4.2 Installing the Dividers Step 1. Working from left to right, insert the power cord of a laptop power brick that is mounted on a divider into the farthest left open outlet and then insert the divider into the LTD. Figure 4-11 Begin to insert dividers into the top row of the cart. Step 2. Repeat until all dividers are installed. Figure 4-12. Netbook Cart dividers with attached power bricks. Step 3. Load one laptop computer into each storage bay. Chapter 4: Configuration and Setup LTD5 Notes LTD5 Notes LTD5 Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less. © Copyright 2011. Black Box Corporation. All rights reserved. LTD5, rev. 1 724-746-5500 | blackbox.com ...