Évaluations - 2, GPA: 4 ( )

Fabricant : Belkin Taille : 467.82 kb Nom Fichier : Langue d'enseignement:

Important Note: You may find two “Universal Serial Bus Controller” entries in the Device Manager list. If so, you will need to search both lists to locate all DockStation entry listings. 11 P74321ea_F5U216_manual_uk 02-06-2003 15:59 Page 12 DRIVER INSTALLATION Windows 2000 Note: Do not connect the DockStation to your computer’s USB port until instructed to do so. 1. Insert the Belkin installation CD into your CD-ROM drive. 2. After a few moments the CD will auto-start. Click the “Install Driver” button to begin the installation process. 3. The installer opening screen will be displayed. Click “Next” to continue. 4. The installer information screen will be displayed next. Read the instructions then click “Next” to continue. 5. Windows will display a “Digital Signature Not Found” message. Select “Yes” to continue the driver installation procedure. 6. Select “Yes, I want to restart my Computer now”, and click “Finish”. 7. Click “Finish” again to restart your computer. 8. After Windows restarts, connect the DockStation to your computer’s Hi-Speed USB 2.0 port. 9. Windows will now detect and install “Generic Hub on USB 2.0 Bus”. 10. The “Found New Hardware Wizard” will now detect the “Belkin USB to Fast Ethernet Adapter”. A “Digital Signature Not Found” message will be displayed. Click “Yes” to continue. 11. The parallel port, and serial port will now be located and installed. No further user input is required. 12. Proceed to “Verifying Proper Installation”. 12 P74321ea_F5U216_manual_uk 02-06-2003 15:59 Page 13 EnDRIVER INSTALLATION Verifying Proper Installation 1. Right-click the “My Computer” icon which is found on your Windows desktop. 2. Select “Properties”, then click the “Hardware” tab. 3. Select “Device Manager”. 4. Click the (+) sign next to “Network Adapters”. The Network Adapters list will open and you should find an entry for “Belkin USB 2.0 to Fast Ethernet Adapter”. 5. Click the (+) sign next to “Ports (COM &LPT)”. 6. The ports list will open, and you should find an entry in the list for “USB Serial Port (Com X)”, where X represents the next available Com port on your computer (typically COM 1, or COM 2). 7. Click the (+) sign next to “Universal Serial Bus Controllers”. 8. The USB Serial Bus Controllers list will open, and you should find two entries in the list for “Generic USB Hub on USB 2.0 Bus”, an entry for “USB High Speed Serial Converter”, and an entry for “USB Printing Support”. Important Note: You may find two “Universal Serial Bus Controller” entries in the Device Manager list. If so, you will need to search both lists to locate all DockStation entry listings. 13 P74321ea_F5U216_manual_uk 02-06-2003 15:59 Page 14 DRIVER INSTALLATION Windows XP Note: Do not connect the DockStation to your computer’s USB port until instructed to do so. 1. Insert the Belkin installation CD into your CD-ROM drive. 2. After a few moments the CD will auto-start. Click the “Install Driver” button to begin the installation process. 3. The installer opening screen will be displayed. Click “Next” to continue. 4. The installer information screen will be displayed next. Read the instructions then click “Next” to continue. 5. Windows will display a Windows Logo warning message. Select “Continue Anyway”. 6. Select “Yes, I want to restart my Computer now”, and click “Finish”. 7. Click “Finish” again to restart your computer. 8. After Windows restarts, connect the DockStation to your computer’s Hi-Speed USB 2.0 port. 9. Windows will now detect and install “Generic Hub on USB 2.0 Bus”. 10. The “Found New Hardware Wizard” will now detect the “Belkin USB to Fast Ethernet Adapter”. A “Digital Signature Not Found” message will be displayed. Click “Yes” to continue. 11. The USB to parallel port, and serial port will now be located and installed. No further user input is required. 12. Proceed to “Verifying Proper Installation”. 14 P74321ea_F5U216_manual_uk 02-06-2003 15:59 Page 15 EnDRIVER INSTALLATION Verifying Proper Installation 1. Right-click the “My Computer” icon which is found on your Windows desktop. 2. Select “Properties”, then click the “Hardware” tab. 3. Select “Device Manager”. 4. Click the (+) sign next to “Network Adapters”. The Network Adapters list will open and you should find an entry for “Belkin USB 2.0 to Fast Ethernet Adapter”. 5. Click the (+) sign next to “Ports (COM &LPT)”. 6. The ports list will open, and you should find an entry in the list for “USB Serial Port (Com X)”, where X represents the next available Com port on your computer (typically COM 1, or COM 2). 7. Click the (+) sign next to “Universal Serial Bus Controllers”. 8. The USB Serial Bus Controllers list will open, and you should find two entries in the list for “Generic USB Hub on USB 2.0 Bus”, an entry for “USB Hi-Speed Serial Converter”, and an entry for “USB Printing Support”. Important Note: You may find two “Universal Serial Bus Controller” entries in the Device Manager list. If so, you will need to search both lists to locate all DockS...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :