Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Notes: Do not pull the cover rudely, as it is connected with the device. 2. Insert the microSD card into the microSD slot. The following picture shows the correct inserting direction. You will hear a click when the microSD card locks in place. 3. Close the microSD cover. Switching On/Off Your Device Hold the Power button to switch on/off the device. Notes: The device is powered on when the LED screen lights up. Charging Your Device You can charge your device by using USB cable or adapter. 1. Insert the charger lead carefully with the plug arrow facing the bottom of the device. 2. The plug only fits one way. Do not use excessive force to insert the plug. 3. Make sure the plug is the right way round and lined up correctly and insert it gently. Working Mode Your device supports three working modes. For the client, we only use PC or laptop as the example in this document. USB Mode: Connect to the device with the USB cable. Wi-Fi Mode: Connect to the device via Wi-Fi. Mixed Mode: Connect to the device with the above two connection methods. Notes: If you want to connect to the Internet by using Wi-Fi mode, make sure that the client supports the Wi-Fi function. The following picture is the application example. All of the client devices can surf on the Internet at the same time. LEGAL INFORMATION Copyright © 2011 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0 Establish a connection between your device and the client Via USB Cable 1. Connect your device and the client with the USB cable. 2. Power on your device. 3. Follow the system prompts to complete the software installation. Notes: • If the system does not launch installation automatically, you can run the installation program in path of My Computer > Mobile Hotspot. • The driver of your device will be installed at the same time. 4. After the installation, the system will create a shortcut icon on your desktop and a program group in the Start>Programs menu. The connection between your device and the client will be established successfully a moment later. Via Wi-Fi 1. Power on your device directly. It will take 1~2 minutes to initialize. 2. Use your normal Wi-Fi application on the client to search the available wireless network. Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP address like “192.168.0.100”. 3. Select the SSID of your device, and then click Connect. Introduction ZTE MF80 is a 3G/2G mobile hotspot device, working in GSM/GPRS/ EDGE/WCDMA/HSPA/HSPA+ network. The client...
Ce manuel est également adapté pour les modèles :Accessoires d'ordinateur - MF80(MOLDTELECOM) (1.51 mb)