Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Accessoires d'ordinateur - MF190(Tigo) (1.06 mb)
Facilité d'utilisation
Please use “;” to separate recipients. Step 4: Input content, and then click the “Send” button. The prompt screen will appear on the interface, click thre “Yes” button, and then the edited short messages will be sent. The SMS content can include 160 individual English characters (including English symbols). After sending sucessfully, the message will be saved into Outbox automatically. If sending fails, the message will be saved into the Draftbox Using USSD Click the USSD icon and input the USSD short code for the service that you require (e.g *222# to access the Tigo Menu and navigate accordingly or *131# to check you balance) Software Installation in Mac OS Step 1: Connect your modem to your Mac PC Step 2: After a few seconds, the system will automatically display a ZTE MODEM CD- ROM icon on the desktop Step 3: Double click Mobile Connection Manager in the ZTE MODEM and then follow the steps to install 12 13 Step 4: Click “Continue” button on the Welcome page Step 5: You can either install the software into the default installation path or you can select a different location by pressing the “Change install location” button and selecting the appropriate directory and then click “Install” button Step 6: Please enter user name and password to be authenticated and click “OK” button to install Step 7: Installation is in progress, after a while, click “Close” button to finish software installation Note: If you have problems installing the modem and software, please contact your service provider for more information Connecting to Internet on Mac OS Step 1: After the modem is correctly connected, click “Finder - Applications - Mobile Connection Manager” on the computer to run the application software Step 2: Click the Internet icon to switch to the Internet interface Step 3: Select the correct configuration profile in the drop-down menu, click “Correct” to start connecting to Internet Disconnecting from Internet on Mac OS Click the Internet icon, and click “Disconnect” button from Internet Frequently Asked Questions & Answers Problem Description Possible Causes Problem Solving After restarting PC, there is no signal 1. The position of the USB Modem inner antenna is unfitting 1. Adjust the angel and position of the USB Modem 2. You are in a place where no GSM/GPRS/ EDGE/WCDMA/ HSDPA network does not reach (E.g Basement car parking lot, tunnel etc) 2. Move to a place with a good signal reception Message sent failed 1. The SMS centre number isn’t correct 1. After consulting with service provider, configure the right number in Message settings 2. The network is busy 2. Try again or later Data connection failed 1. You are in a place where no GSM/GPRS/ EDGE/WCDMA/ HSDPA network does not reach (E.g Basement car parking lot, tunnel etc) 1. Move to a place with a good signal reception 2. The network is busy 2. Try again or later 3. The APN in the configuration files is an...