Failure to follow these instructions could damage your equipment and void its warranty. Online instructions covering customer-installable parts are available at Note: Blank drive carriers, which may fill some of the hard drive bays, follow the same replacement procedure as hard drives. If you are replacing a blank carrier with a drive module, be sure to keep the blank for possible future use. Blank drive carriers must be installed in all empty drive bays to maintain proper airflow through the

Failure to follow these instructions could damage your equipment and void its warranty. Online instructions covering customer-installable parts are available at Note: Blank drive carriers, which may fill some of the hard drive bays, follow the same replacement procedure as hard drives. If you are replacing a blank carrier with a drive module, be sure to keep the blank for possible future use. Blank drive carriers must be installed in all empty drive bays to maintain proper airflow through the

This is a safety feature. If you are unable to insert the plug into the outlet because the outlet is not grounded, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not defeat the purpose of the grounding plug! Because you are installing the server in a rack with other equipment, be certain that the power outlet and any other equipment, such as a power strip, used with the rack is designed to carry the electrical load of multiple devices. Check the document

Failure to follow these instructions could damage your equipment and void its warranty. Note: Online instructions covering customer-installable parts are available at Tools Required No tools are required for this procedure. You may, however, find a Phillips screwdriver useful in releasing the thumbscrews at the front of the server. Opening the Server The server slides open from the front of the rack. The top cover remains in place in the rack while the bottom housing (containing all interna

Failure to follow these instructions could result in damage to your equipment and may void your warranty. Installing memory in your computer requires four basic steps: • Turn off the computer. • Open the SDRAM DIMM access door. • Install the new memory module in its slot. • Close the access door. Note: A video version of the installation instructions is available at Tools Required • Flat-blade screwdriver or coin. Electrostatic Discharge (ESD) Static electricity, a normal and natural phenomenon,

Power Mac G4 / Macintosh Server G4 SCSI Hard Drive Replacement Instructions Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to your equipment and may void your warranty. Note: Written and video instructions covering customer-installable parts are available at Tools Required • Phillips screwdriver • Flat-blade screwdriver Backing Up Your Data Warning: Before replacing your hard drive, make sure you back up all data on the dri

Hard Drive 1 Make sure latch on back panel is up, so that drive is unlocked. 2 Pull hard drive out of far-left drive bay. © 2009 Apple Inc. All rights reserved. 073-1253 Rev. A Graphics Card 3 Locate graphics card in slot 1. 4 Using Phillips #1 screwdriver, loosen 2 captive screws securing card’s bracket to enclosure. 5 Remove bracket from enclosure. © 2009 Apple Inc. All rights reserved. 073-1253 Rev. A Note: Card is held in place by retention bar. Following two steps explain how to release bar

Suddenly, the next generation of high-performance applications for design and graphics, media production, and scientific research is possible and practical on the desktop. That’s because the PowerPC G5 brings a 64-bit architecture to the Mac platform—ushering in an exciting new era in personal computing. The introduction of the PowerPC G5 is a product of Apple’s partnership with IBM, leveraging the most advanced chip design and manufacturing expertise in the world. The results are phenomenal: 13

Consultthe service and support information that came with your Apple productfor instructions on how to contact an Apple-authorized service provideror Apple for service. If you attempt to install additional DRAMyourself, any damage you may cause to your equipment will not becovered by the limited warranty on your computer. See an Apple- authorized dealer or service provider for additional information aboutthis or any other warranty question. Disk drives m Apple SuperDrive 1.4 MB high-density flop