Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Ordinateurs - A600 All-in-One (ideacentre) (934.26 kb)
Ordinateurs - A600 All-in-One (ideacentre) (911.23 kb)
Facilité d'utilisation
Bluetooth configuration
To switch to the Game mode
Air mouse
To install the batteries, press the cover in
7
You can use the remote control as a regu-
and lift up.
lar mouse by using the air mouse.Under
Headphone
LED indicator of Bluetooth
the air mouse mode, all the functions of
1
remote control also can be used.
LED indicator of joystick game
LED indicator of CD game
Press the cover in and lift up.
When the Bluetooth LED indicator blinks twice con-
Power
Game switch
secutively at every second, and the remote control
Air mouse buttons:
Phone On/Off
Record
Press Game button to switch the game
Stop
makes beep sound, it indicates that the remote is
OK
Left air mouse
to the preinstalled game mode.
2
button, Air mouse
Rewind
Fast forward
Close
active and can be detected by the computer.
Play or pause
On/Off button, Right
Replay
Skip
8
air mouse button.
Windows Media Center Start
Install the 3
batteries in the
Back
More
battery compartment.
To proceed with the Bluetooth device configuration, do
When the air mouse
Direction
Note: If you experience a problem, verify
the following as prompted.
button is on, it indi-
the batteries are good, and they are
Select the Lenovo_RC icon from the Name channels in
cates the air mouse
OK
correctly Installed. If not, the remote control
the Pair with wireless devices dialog box and click
is functional.
might not work or is possibly damaged.
Next. Select Creat a pairing code for me and the
Air mouse ON/OFF
password is 0000. The remote is now configured and
Press the air mouse On/Off button
Left air mouse/Game A
When the M LED is on, this indicates
Right air mouse/Game B
A
B
can be used.
OK
until the key indicates that the air
3
the game has been switched to the
Volume up/Game X
Channel Up/Game Y
X
Y
mouse can be used normally.
The Remote Control initializes and is
9
preinstalled game mode.
Using the air mouse is the same as
Mute
Volume down/Game
Channel down/Game throttle down
now ready to be configured as follows.
using a regular mouse.
throttle up
Guide
ABC
DEF
4
Bluetooth LED indicator will be on solid until
GHI
JKL
MNO
Digit/Input sources
In Windows, Click Start -> Control Panel to
the successful completion of the Bluetooth
PQRS
TUV
WXYZ
open the control panel dialog box.
connection.
* key
*
＃
# key
Clear
Enter
5
Don't press Play and Digit 1, after successful
Teletex On/Off (Select models only)
Select the Bluetooth icon in the dialog box
connecting the Bluetooth.
(Select models only )
to add the remote device. Press Add
to open the Bluetooth device guide dialog
Bluetooth audio configuration.
box. All the configuration process needs to
1
Right click Lenovo_RC device and select
Microphone
be finished within 180 seconds. Select the
Property icon in the wireless device dialog box.
related option in the pop-up Bluetooth
device dialog box and click Next.
2
Turn on or turn off the Game mode, and switch all the games.
Select Headset icon from pop-up property
Turn on or turn off the Air Mouse mode.
dialog box.
To start the game, place the Game CD in the
6
Turn on or turn off the Wireless Phone mode.
optical drive and follow the prompts by
Turn on the Windows Media Center
Press Play and Digit 1
3
Right click Lenovo_RC device and select
installing and using the remote. For more
Be sure to hold the air mouse horizontally.
Note:
at the same time over
Audio icon in the wireless device dialog box.
information about the game, see the Access
Do not use the air mouse in a slanted or
The direction key and OK key only can be used on Game mode, and they are useless
10 seconds.
Help on the Game CD.
vertical position.
on the Windows Media Center mode.
4
Click Connect icon if the Lenovo_RC audio
If you do, the result might not be your
In the Joystick Game mode, the Volume up and Volume down keys only can execute
Game X and Y, Throttle up and Throttle down functions.
device is disconnection in Audio dialog box.
intended selection.
Important information about using the Remote Control
Be sure to use known, good alkaline batteries to ensure the remote works properly and to avoid damaging the Remote Control. Remove all batteries when you are not using the Remote Control for an extended period of time. Use the remote as shown below:
Too close to the computer.
0 -1 meter (0 – 3 feet)
?
Suggested range:
1 - 3 meters (3 -10 feet)
Too far from the computer.
Over 3 meters (over 10 feet)
30
The optimum distance between the remote and
Be sure there are no obstructions between
computer is 1 - 3 meters (3 -10 feet).
The best angle to use the remote is 30°.
the remote control and the computer.
CAUTION
CAUTION
NOTE:
Bluetooth LED bright (solid): Indicates that the connection is estab-
the indicator is light. You may move the remote control or press any
interval, it indicates that the battery electric power is low and the
Be sure the remote control wrist
Do not handle the
remote control if your
lished between the remote control and the computer.
key to wake up the remote control and go back to the previous
remote control will turn off automatically after 10 minutes.
strap is adjusted tightly on your
wrist when using the remote
hand is wet or the
M LED bright (solid): Indicates that CD game is active and can be
mode.
control. This will prevent possibly
remote is wet.
hitting a bystander, or other
You might receive an
manipulated by the remote control.
The remote control cannot be used when the remote control power
objects in the area where you are
electrical shock and or
using the remote control.
damage the remote
3D LED bright (solid): Indicates that joystick game is active and can
Under wireless phone mode, the remote control will not go into the
indicator blinks three times in every second for three seconds and
control.
be manipulated by the remote control.
standby status or sleep mode.
with the beep sound at the same time. You need to change new
Game switch button: Use to switch to the 3 different game modes --
batteries to make it work.
preinstalled game, joystick game, or to turn off the game. Switch to
Under other mode, after the remote control going into the standby
CAUTION
CAUTION
the different modes by pressing the button.
status for 10 minutes and without waking it up. it will go into the
Under Windows MCE mode:
To avoid hurting
sleep mode. The Bluetooth will be disconnection and the indicator is
MCE remote control works normally. You need press related button
Be aware of both the
someone or
damaging something,
The remote control is the standard MCE remote control for the
unlighted.
to turn on the air mouse, game or wireless phone function.
people and the objects
around you when you
do not attempt to
throw the remote
model configured with Windows MCE.
Press any key to wake up the remote control, but you have to wait
use the remote.
control.
for several seconds to recover the Bluetooth connection.
Under Air Mouse mode:
The Wireless Phone and Air Mouse keys need to be pressed more
You needn't to do the Bluetooth pairing again when it wakes up from
MCE remote control and air mouse work normally. You need press
than 1 second to turn on or turn off these functions. You need to
standby status or sleep mode.
related button to turn on the game and wireless phone function.
install related software to use the Wireless Phone.
When computer go into the standby status (S3), sleep mode (S4) or
CAUTION
You can use the air mouse similar with common mouse to move the
turn off (S5), the remote control will go into the sleep mode auto-
Under Wireless Phone mode:
cursor.
matically and the Bluetooth will be disconnection. After waking up or
MCE remote control and wireless phone function work normally.
Note: Make sure the front side of the remote control always towards
restarting the system, you may press any key on the remote control
You need press related button to turn on the game and air mouse.
up.
to wake it up and finish the Bluetooth connection.
CAUTION
Under Game mode:
To avoid hurting
Under the air mouse and game mode, the remote control will go into the
To save electric power of the battery, using the remote control
The Game function works normally. You need press related button
someone or damaging
something, do not whirl
Keep a safe distance away from anyone using
standby status, when the remote control is inactivate for 10-20 seconds.
regularly.
to turn on the air mouse, MCE remote control or wireless phone
the remote control by
the wrist strap.
the remote control.
Under the standby status, the Bluetooth will keep connecting and
When the remote control power indicator blinks every three seconds
function.