Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
• Source number 1234510012001 is changed to 20018 (according to Rule 3). • Source number 3122 is changed to 2312 (according to Rule 4). 3. Configure the Number Manipulation table according to Table 3-3. 4. Click the Submit button to save your changes. Notes: •The manipulation rules are applied to any incoming call whose 1) destination number prefix matches prefix defined in the ‘Destination Number’ field, 2) source number prefix matches the prefix defined in the ‘Source Prefix’ field, and 3) source IP address matches IP address defined in the ‘Source IP’ field (if applicable). •The number manipulation can be performed using a combination of each of the above criteria, or using each criterion independently. •The manipulation rules are executed in the following order: 1) Number of stripped digits. 2) Number of digits to leave. 3) Prefix / suffix to add. Table 3-3: Number Manipulation Parameters Description Parameter Description Destination Prefix Destination (called) telephone number prefix. An asterisk (*) represents any number. Source Prefix Source (caller) telephone number prefix. An asterisk (*) represents any number. Quick Installation Guide 24 Document #: LTRT-26301 Quick Installation Guide 3. Configuring the MediaPack Table 3-3: Number Manipulation Parameters Description Parameter Description Source IP Source IP address of the call (obtained from the Contact header in the INVITE message). (Applicable only to the Note: The source IP address can include the ‘x’ wildcard to represent single digits. For ‘Destination Phone example: 10.8.8.xx represents all the addresses between 10.8.8.10 to 10.8.8.99. In addition, Number Manipulation the asterisk (*) wildcard represents any number between 0 and 255, e.g., 10.8.8.* represents all Table for IP to Tel’) addresses between 10.8.8.0 and 10.8.8.255. Num of Stripped • Enter the number of digits that you want to remove from the left of the telephone Digits number prefix. For example, if you enter 3 and the phone number is 5551234, the new phone number is 1234. • Enter the number of digits in parenthesis (…) that you want to remove from the right of the telephone number prefix. Note: A combination of the two options is allowed, e.g., 2(3). Prefix / Suffix to Add • Add to prefix: Enter the number / string you want to add to the front of the phone number. For example, if you enter 9 and the phone number is 1234, the new number is 91234. • Add to suffix: Enter the number / string in parenthesis you want to add to the end of the phone. For example, if you enter (00) and the phone number is 1234, the new number is 123400. Note: You can enter a prefix and a suffix in the same field, e.g., 9(00). Number of Digits to Leave Enter the number of digits that you want to leave from the right. Presentation Select ‘Allowed’ to send Caller ID information when a call is made using these destination / source prefixes. Select ‘Restricted’ if you want to restrict Caller ID information for these prefixes. 3.3.2.4.1 Dialing Plan Notation The dialing notation applies to numbers entered in the 'Destination Prefix' and 'Source Prefix' fields of the Manipulation tables to represent multiple numbers. Table 3-4: Dialing Plan Notations Notation Description Example [n-m] Represents a range of numbers. Note: range of letters is not supported. [5551200-5551300]#: Represents all numbers from 5551200 to 5551300. 123[100-200]#: Represents all numbers from 123100 to 123200. [n,m] Represents multiple numbers. Note: This notation only supports single-digit numbers. [2,3,4]xxx#: Represents four-digit numbers that start with 2, 3 or 4. x Represents any single digit. 54324: Represents any number that starts with 54324. Pound sign (#) at the end of a number Represents the end of a number. 54324xx#: Represents a 7 digit number that starts with 54324. A single asterisk (*) Represents any number. *: Represents any number. The gateway matches the rules starting at the top of the table (i.e., top rules take precedence over lower rules). For this reason, enter more specific rules above more generic rules. For example, if you enter 551 in entry 1 and 55 in entry 2, the gateway applies rule 1 to numbers that start with 551 and applies rule 2 to numbers that start with 550, 552, 553, and so on (skipping 551). However if you enter 55 in entry 1 and 551 in entry 2, the gateway applies rule 1 to all numbers that start with 55 including numbers that start with 551. Version 5.0 25 September 2007 MP-11x & Microsoft Office Communications Server 2007 3.3.2.4.2 Number Normalization Examples Two examples are provided below for number normalization. The examples are based on the following assumptions: a PBX with prefix (local) number 333 and a 4-digit extension number that begins with the digit 1 (i.e., 1xxx); National area code 206; International code 1. • Modifying E.164 Numbers to PBX Format for Outbound Calls: Outbound calls refer to calls made by Office Communications Server 2007 users (OCS clients) connected through IP to...
Ce manuel est également adapté pour les modèles :Ordinateurs - MP-118 (1.56 mb)