Évaluations - 2, GPA: 5 ( )

Fabricant : Acer Taille : 3.32 mb Nom Fichier : Langue d'enseignement:

. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. Turning on your computer After connecting the necessary peripherals and plugging in the power cable, you are now ready to turn the computer on and get to work. To turn on your computer: Turn on all peripherals connected to your computer, such as the monitor, printer, speakers, etc. 2 On the front panel of your computer, press the Power button. Important: Make sure that the power cable is properly plugged into an electrical outlet. If you are using a power strip or an AVR (Auto-Voltage Regulator), make sure that it is plugged in and turned on. 2 Setting up your computer Turning off your computer To turn off your computer, follow the steps below. For Windows XP: 1 On the Windows XP taskbar, click on the Start button, and click Turn Off Computer, then click Turn Off. 2 Turn off all peripherals connected to your computer. If you cannot shut down your computer normally, press and hold the power button for at least four seconds. Quickly pressing the button may put the computer in suspend mode only. Connecting options Connecting to the network You can connect your computer to a Local Area Network (LAN) using a network cable. To do so, simply plug the network cable into the network port on the rear panel of your computer. Note: Consult your network system administrator or operating system manual for information on how to configure your network setup. 2 Setting up your computer Connecting multimedia devices You can connect multimedia devices such as microphones, earphones or headphones, external speakers and audio line-in devices. These devices will let you take advantage of your computer's multimedia features. Note: The multimedia devices shown below are for reference only. Actual device models may vary in selected countries. Plug the devices in as follows: • Microphone: Connects to the Microphone-in jacks (pink jacks) located on the front and rear panels of your computer. Note: For information on how to configure multimedia devices, consult the documentation that came with each device. • Earphones, headphones: Connect to the headphone jack located on the front panel of your computer. Note: To adjust the headphone volume, use the volume control buttons on the keyboard. You can also adjust the volume by using the volume icon on the taskbar at the bottom of your screen. • External speakers: Connect to the audio-out/line-out jack (lime-green jack) located on the rear panel of your computer. 2 Setting up your computer • Audio line-in device: Connects to the audio-in/line-in jack (light blue jack) located on the rear panel of your computer 3 System utilities This chapter describes applications that are preinstalled on your computer. Dual-display To enable the dual monitor feature of your computer, first ensure that the second monitor is connected, then, select Start, Control Panel, Display and click on Settings. Select the secondary monitor (2) icon in the display box and then click the check box Extend my Windows desktop onto this monitor. Finally, click Apply to confirm the new settings and click OK to complete the process. 3 System utilities Recovering your system If your operating system files are lost or damaged, the recovery process will restore your system's original factory default settings or last system backup. 1 Your Aspire L Series computer includes an OBR (see page5"Front and rear panels") button, a feature that makes restoring your system quick and easy. 2 After the POST runs, Press Alt + F10 combine key during BIOS to enter hidden partition. 3 This utility has same password protection with Acer eRecovery. Follow all onscreen instructions. Caution! Running the Recovery operation will erase all files previously saved on the C drive so make sure to back up your important files before starting the recovery process. Note : This feature occupies 5GB in a hidden partition on your hard drive to store the default settings. If you attempt to restore your system using the One Button Recovery feature, and the system DOES NOT respond, contact your local vendor or authorised Acer representative immediately. 4 Frequently asked questions This chapter tells you what to do in case your computer is not working properly. However, if a more serious problem arises, contact your dealer or the technical support center (for assistance. Frequently asked questions The following questions indicate possible situations that may arise during the use of your computer and each is followed by easy answers and solutions. I pressed the power switch but the system did not boot up. Check the LED located above the power switch. If the LED is not lit, no power is being applied to the system. Try the following: • Check if you properly plugged the power cable into an electrical outlet. • If you are using a power strip or AVR, make sure it is plugged in and turned on. Nothing appears on the screen. Your comput...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :