If any items require changes, please consult your system supervisor. 52 BIOS Setup Console Redirection Figure 4-2: Console Redirection • ..........COM PortAddress If this option is set to enabled, it will use a port on the motherboard. ..On-board COMA Use COMA as he COM port address. ..Disabled Disable this function. (Default setting) • .......... Baud Rate This option allows user to set the specified baud rate. ..Options 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K. • ..........Console Type This option allows user to select the specified terminal type. This is defined by IEEE. ..Options VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8. 53 GS-R127-RH Series Rack Mount Server • ..........Flow Control This option provide user to enable the flow control function. ..None Not supported. ..XON/OFF Software control. ..CTS/RTS Hardware control. (Default setting) • ..........Continue C.R. after POST This option allows user to enable console redirection after O.S has loaded. ..On Enable console redirection after O.S has loaded. ..Off Disable this function. (Default setting) 54 BIOS Setup • ..........Post Error Pause If this item is set to enabled, the system will wai for user intervention on critical POST errors. If this item is disabled, the system will boot with no intervention if possible. ..Enabled Enable Post Error Pause. (Default setting) ..Disabled Disable this function. • ..........After Power Failure This option provides user to set the mode of operation if an AC / power loss occurs. ..Power On System power state when AC cord is re-plugged. (Default setting) ..Stay Off Do not power on system when AC power is back. ..Last State Set system to the last sate when AC power is removed. Do not power on system when AC power is back. • ..........FAN Speed Control ..Enabled Enable FAN Speed Control. (Default setting) ..Disabled Disable this function. 55 GS-R127-RH Series Rack Mount Server • ..........Mini BMC Function ..Enabled Enable Mini BMC function. (Default value) ..Disabled Disable this function. This option will disappear and disable when BMC module is populated. • ..........Mini BMC SEL View Press [Enter] to view the Mini BMC SEL. This option will disappear and disable when BMC module is populated. 56 BIOS Setup Boot • ..........• About This Section: Boot The “Boot” menu allows user to select among four possible types of boot devices listed using the up and down arrow keys. By applying <+> and key, you can promote devices and by using the <-> key, you can demote devices. Promotion or demotion of devices alerts the priority that the system uses to search for boot device on system power on. Figure 5: Boot 57 GS-R127-RH Series Rack Mount Server • ..........Boot Priority Order This field determines which type of device the system attempt to boot from after PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the first device is not a bootable device, the system will seek for next available device. Key used to view ot configure devices: Up and Down arrows select a device. <+> and <-> moves the device up or down. and specifies the device fixed or removable. exclude or include the device to boot. <1-4> Loads default boot secquence. 58 BIOS Setup Exit Figure 6: Exit • ..........• About This Section: Exit Once you have changed all of the set values in the BIOS setup, you should save your chnages and exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu. • .......... Exit Saving Changes • .......... Exit Discarding Changes • .......... Load Settup Default • .......... Discard Change • .......... Save Changes 59 GS-R127-RH Series Rack Mount Server • ..........Exit Saving Changes This option allows user to exit system setup with saving the changes. Press on this item to ask for the following confirmation message: Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS. Therefore, whenyou boot up your computer next time, the BIOS will re-configure your system according data in CMOS. 60 BIOS Setup • ..........Exit Discarding Changes This option allows user to exit system setup without changing any previous settings values in CMOS. The previous selection remain in effect. This will exit the Setup Utility and restart your compuetr when selecting this option. • ..........Load SettupDefault This option allows user to load default values for all setup items. When you press on this item, you will get a confirmation dialog box with a message as below: 61 GS-R127-RH Series Rack Mount Server • ..........Discard Changes This option allows user to load previos values from CMOS for all setup item. When you press on this item, you will get a confirmation dialog box with a message as below: 62 BIOS Setup • ..........Save Changes This option allows user to save setup dat ato CMOS. When you press on this item, you will get a confirmation dialog box with a message as below: Press...
