Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
This document will guide you through the process of getting your Player connected to the Scala QuickStart service. Carefully unpack your new HP SignagePlayer from the carton. You should find the following contents: • Player PC • Power Cord • Mouse • Keyboard Step1: Connect your Player to your Screen This may be a VGA, DVI, HDMI or DisplayPort connection depending on model. NOTE: For models with an optional video card, please use the video connectors on the expansion card. The motherboard video connectors are disabled in this configuration. Step 2: Connect an Internet Ethernet cable to your Player NOTE: If you would like to connect to the Internet via Wi-Fi or if you have an advanced network setting such as a proxy server, you will need to first configure that in Windows appropriately. If so, please connect the Keyboard and Mouse to your Player at this time. Step 3: Connect the power cords to the Player and Screen and switch both devices on. english-1 The system will take a minute or two to start up and then you should see a screen like this: NOTE: If you need to connect to the Internet via Wi-Fi, please press ESC on the keyboard now, and set up your wireless or advanced network settings in Windows. When that is complete, please restart your Player. The Player will connect over the Internet to the Scala QuickStart server and in a few moments, display a screen like this: If you don’t see this screen after a short time, then most likely, the Player cannot connect to the Internet. Press ESC on the keyboard, verify your Internet connection, and then restart the Player. english-2 Step 4: From another Internet connected PC, laptop or mobile device, browse to: Then enter the Registration Code shown on the Player’s screen into the box shown below in your browser. Check the appropriate boxes, and then click the Activate Button. If you already have a Scala QuickStart account, you can add your new Player to your existing account. If you would like to create a new account, follow the online instructions to set up a username and password. Then complete the checkout process to pay for the monthly Scala QuickStart subscription with a credit card. Finally, you will be given a website link to login to Scala QuickStart. Click that link to login using your username and password. Please bookmark this website for future reference. english-3 After setting up your account online, the Player will be remotely configured and display a screen like this: This process may take a few minutes. Please be patient. When all of the Player settings have been made, you will see a screen like this: Your Player will then restart and begin downloading your first default playlist. english-4 Congratulations! Your new HP SignagePlayer is now online! If you have not already done so, you may now login to your account with the information given in Step 4. As a first time user, you may wish to read the “Welcome to Scala QuickStart” guide which is downloa...
Ce manuel est également adapté pour les modèles :Ordinateurs - HP SignagePlayer mp8000s (1.14 mb)