NOTE:
This restore method will not work with all USB flash
devices. USB flash devices with multiple partitions
generally do not support this restore method. The range of
USB flash devices available on the market constantly
changes. Not all USB flash devices have been tested with
the HP Thin Client Imaging Tool.
Before using the utility, you must download the appropriate image from
http://www.hp.com/#Support.
By default, the XPe/WES thin client platforms have the boot-order set to USB first,
fol owed by HDD/ATA Flash, and finally Network. It is recommended that you
change the boot-order to Network first if you choose to restore the image via a
remote management tool. This can be done locally through the BIOS setup or
remotely by script execution of the HP Add-On (Configure BIOS Set ings) through
the remote management tool of your choice. Please consult the
Configure_BIOS_Set ings text file found within the HP Add-On (Configure BIOS
Settings) for details about changing the boot order.
The HP Add-On (Configure BIOS Set ings) may be downloaded from
http://www.hp.com/#Support.
Getting Started
Two deployment options are supported by this utility. You can choose to do one or
both of the following:
• Create a bootable flash image on a USB flash device (such as a drive key).
• Unpack the components of the image to a directory for use in a custom
deployment scenario.
Download and run the Package-for-the-Web deliverable (an .exe file) that contains
the original factory image for the thin client. The HP Thin Client Imaging Tool
(CRStart.exe) runs automatically and displays the following dialog:

Choose one of the deployment options: USB Format, or Deployment. Each option is
described below.
2

---

...

Ce manuel est également adapté pour les modèles :
Ordinateurs - HP Compaq t5300 Thin Client (133.95 kb)
Ordinateurs - HP Compaq t5500 Thin Client (133.95 kb)
Ordinateurs - HP Compaq t5510 Thin Client (133.95 kb)
Ordinateurs - HP Compaq t5515 Thin Client (133.95 kb)