Battery Replacement
General Hardware Installation Sequence
To ensure the proper installation thin client hardware components:
1.
Back up any data, if necessary.
2.
If the thin client is powered on:
a.
Turn the unit and any other attached devices off.
b.
Disconnect the power cord from the wall outlet.
c.
Disconnect any external devices or cables, such as an antenna or cable lock.
WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be
sure to disconnect the power cord from the wall outlet and allow the internal system components
to cool before touching.
WARNING! To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug
telecommunications or telephone connectors into the network interface controller (NIC)
receptacles.
CAUTION: Static electricity can damage the electronic components of the thin client or optional
equipment. Before beginning these procedures, ensure that you are discharged of static electricity
by briefly touching a grounded metal object.
3.
Remove the secure USB compartment cover. See Removing the Secure USB Compartment Cover
on page 2 for more information.
4.
Remove the side access panel and metal side cover. See Removing and Replacing the Side
Access Panel and Metal Side Cover on page 2 for more information.
5.
Remove any hardware that you will replace.
6.
Install or replace equipment.
7.
Replace the side access panel and metal side cover. See Removing and Replacing the Side
Access Panel and Metal Side Cover on page 2.
8.
Replace the secure USB compartment cover. See Replacing the Secure USB Compartment Cover
on page 6.
9.
Reconnect any external devices and power cords.
10. Turn on the monitor, the thin client, and any devices you want to test.
11. Load any necessary drivers.
General Hardware Installation Sequence
1

---

...

Ce manuel est également adapté pour les modèles :
Ordinateurs - HP Compaq t5730w Thin Client (501.09 kb)