Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Ordinateurs - HP 9000 rp8440 Server (145.21 kb)
Ordinateurs - HP 9000 rp8440 Server (1.06 mb)
Ordinateurs - HP 9000 rp8440 Server (609.06 kb)
Facilité d'utilisation
HP sx2000 Server Expansion Unit AB301A
Verify Firmware Version of sx2000 SEU During Installation
Details
A single process is used at the factory for shipping the sx2000 SEU. The process uses an HP Integrity server for factory integrated and
non-integrated SEU's. Therefore, the SEU will always contain an IPF firmware recipe when it ships from the factory to a customer.
The SEU can be attached to an HP 9000 rp8440 server or an HP Integrity rx8640 server. Each server uses different firmware. Each of
these servers requires matched SEU firmware and programmable hardware versions. The SEU versions must match the associated
server versions. During installation at a customer site, ensure the SEU contains a matching PA-RISC firmware revision when
connecting to an HP 9000 PA-RISC server.
As documented in the HP Service Guide, Server Expansion Unit for the HP Integrity rx8640 and User Service Guide, Server
Expansion Unit for the HP Integrity rx8640, perform the sysrev command from the MP Command Menu. Verify the firmware and
programmable hardware revisions on the SEU are the same revisions as those on the HP 9000 PA-RISC server.
The SEU versions are listed in the section of the sysrev output titled IO Cabinet FPGA and Firmware revision report.
See the following example from an HP 9000 rp8440 server with SEU:
MP:CM> sysrev
Cabinet firmware revision report
PROGRAMMABLE HARDWARE :
System Backplane : GPM EMMUX
----------- -----------
001.002.000 001.000.000
IO Backplane : IO_LPM-0 IO_LPM-1
----------- -----------
001.003.000 001.003.000
Core IO : CIO-0 CIO-1
----------- -----------
001.002.000 001.002.000
CELL_LPM CELL_JTAG CELL_PDH
----------- ----------- -----------
Cell 0 : 001.002.000 001.002.000 001.005.001
Cell 1 : 001.002.000 001.002.000 001.005.001
Cell 2 : 001.002.000 001.002.000 001.005.001
Cell 3 : 001.002.000 001.002.000 001.005.001
FIRMWARE:
Core IO
MP-0 : B.002.005.011
ED-0 : 002.007.000
MP-1 : B.002.005.011
ED-1 : 002.007.000
Cell 0
PDHC : B.023.003.038 - Active
PDHC : B.023.003.037
PDC_FW : 043.005.000 - Active
PDC_FW : 043.003.000
Cell 1
PDHC : B.023.003.038 - Active
HP Part No. *AB301-9010A*
April 2008
... Ce manuel est également adapté pour les modèles :
Ordinateurs - HP Integrity rx8640 Server (23.19 kb)