Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
PROGRAM $SYSTEM.SYSTEM.SNMPAGT, &
OUTFILE $ZHOME, &
STARTUPMSG "TCPIP^PROCESS^NAME $ZB018", &
STARTMODE SYSTEM
START PROCESS $ZZKRN.SWANA-SNMP
=========================================================================
== Configure a SNMP Trap multiplexor for the SWAN TCPIP's. This is
== to catch SWAN hardware event traffic that is to be routed to TSM.
=========================================================================
ADD PROCESS $ZZWAN.#ZTMX1 ,IOPOBJECT $SYSTEM.SYS00.SNMPTMUX, CPU 00, &
ALTCPU 01, TYPE (0,49), STARTUP " -a $ZTMXA -t ($ZB018,$ZB01C)"
START PROCESS $ZZWAN.#ZTMX1
=========================================================================
== Define an ATP6100 profile for the lines on SWAN S01.
=========================================================================
ADD PROFILE $ZZWAN.#ATPTERM, FILE $SYSTEM.SYS00.PATPTERM
=========================================================================
== For each of the SWAN's, you must make sure that the TRACKID is
== correctly set to the same trackid that is on the printed label
== on the rear of each of the SWAN boxes.
=========================================================================
=========================================================================
== Configure the SWAN concentrator objects for SWAN S01.
=========================================================================
ADD ADAPTER $ZZWAN.#S01,TRACKID "fill01", &
SNMPCODE $SYSTEM.CSS00.C7849P00, &
KERNELCODE $SYSTEM.CSS00.C7953P00, &
TCPIP $ZB018, HOSTIP 192.168.05.83, &
ALTTCPIP $ZB01C, ALTHOSTIP 192.168.07.83
ADD SERVER $ZZWAN.#S01.1
ADD SERVER $ZZWAN.#S01.2
ADD SERVER $ZZWAN.#S01.3
ADD PATH $ZZWAN.#S01.1.A, IPADDRESS 192.168.05.101
ADD PATH $ZZWAN.#S01.1.B, IPADDRESS 192.168.07.101
ADD PATH $ZZWAN.#S01.2.A, IPADDRESS 192.168.05.102
ADD PATH $ZZWAN.#S01.2.B, IPADDRESS 192.168.07.102
ADD PATH $ZZWAN.#S01.3.A, IPADDRESS 192.168.05.103
ADD PATH $ZZWAN.#S01.3.B, IPADDRESS 192.168.07.103
=========================================================================
== Define the WAN lines as ATP6100 lines for SWAN S01.
=========================================================================
ADD DEVICE $ZZWAN.#S1P1, PROFILE ATPTERM, &
IOPOBJECT $SYSTEM.SYS00.OATPCSS, &
CPU 00, ALTCPU 01, TYPE (53,00), RECSIZE 80, CLIP 1, LINE 0, &
ADAPTER S01, STARTDOWN
ADD DEVICE $ZZWAN.#S1S1, PROFILE ATPTERM, &
IOPOBJECT $SYSTEM.SYS00.OATPCSS, &
CPU 00, ALTCPU 01, TYPE (53,00), RECSIZE 80, CLIP 1, LINE 1, &
ADAPTER S01, STARTDOWN
ADD DEVICE $ZZWAN.#S1P2, PROFILE ATPTERM, &
IOPOBJECT $SYSTEM.SYS00.OATPCSS, &
CPU 00, ALTCPU 01, TYPE (53,00), RECSIZE 80, CLIP 2, LINE 0, &
ADAPTER S01, STARTDOWN
...