HP ProLiant WS460c G6

Overview
Interconnect bay numbering and device
•
HP BladeSystem c3000 Enclosure and Tower Enclosure
Workstation Blade with
mapping
These instructions provide an overview of the HP ProLiant WS460c
WS460c Graphics Expansion
G6 Workstation Blade installation process. For software installation
•
HP BladeSystem c7000 Enclosure
information, see the Administrator's Guide for Microsoft Windows
Blade
on HP ProLiant Blade Workstations.

Installation Instructions
Installing a workstation blade


1. Instal and configure an HP BladeSystem c-Class enclosure.


2. Install any workstation blade options.
3. Instal interconnect modules in the enclosure.
4. Connect the interconnect modules to the network.
5. Install a workstation blade.
6. Complete the workstation blade configuration.

For definitions of the acronyms used in this document, refer to
"Acronyms and abbreviations" in the workstation blade user guide.




Instal ing an HP BladeSystem c-
To support network connections for specific signals, instal an
interconnect module in the bay corresponding to the embedded NIC

Class enclosure
or mezzanine signals.

Server blade
Interconnect bay
Interconnect bay labels
Before performing any workstation blade-specific procedures, instal
signal
an HP BladeSystem c-Class enclosure.
NIC 1
1

The most current documentation for workstation blades and other
(embedded)
HP BladeSystem components is available at the HP website
NIC 2
2

(http://www.hp.com/go/bladesystem/documentation).

(embedded)
Documentation is also available in the following locations:
Mezzanine 1
3 and 4

•
Documentation CD that ships with the enclosure

Mezzanine 2
5 and 6


•
HP Business Support Center website
Server blade Interconnect Interconnect Notes
(http://www.hp.com/support)

7 and 8

signal
bay
bay label


number
Installing workstation blade
For detailed port mapping information, see the HP BladeSystem
NIC 1, 2
1

—
enclosure instal ation poster or the HP BladeSystem enclosure setup
(embedded)
options
and installation guide on the HP website
Mezzanine
2
(http://www.hp.com/go/bladesystem/documentation).

Four port cards
1
connect to bay 2
Before installing the workstation blade, install any workstation blade
options, such as an additional processor, hard drive, etc. For
Mezzanine
3,4

• Four port cards
workstation blade options installation information, see the
2
• Ports 1 and 3
Administrator's Guide for your operating system.
connect to bay

3
Instal ing interconnect modules
• Ports 2 and 4
connect to bay
For specific steps to instal interconnect modules, see the
4
documentation that ships with the interconnect module.


For detailed port mapping information, see the HP BladeSystem
© Copyright 2010 Hewlet -Packard Development Company, L.P.
enclosure instal ation poster or the HP BladeSystem enclosure setup
The information contained herein is subject to change without notice. The
and installation guide on the HP website
only warranties for HP products and services are set forth in the express
(http://www.hp.com/go/bladesystem/documentation).

warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must
be configured with network interconnect devices to manage signals
Part Number 582458-002
between the workstation blades and the external network.
March 2010 (Second Edition)
Two types of interconnect modules are available for HP BladeSystem
c-Class enclosures: Pass-thru modules and switch modules. For more

---

...

Ce manuel est également adapté pour les modèles :
Ordinateurs - HP Server tc2110 (256.54 kb)