Évaluations - 2, GPA: 3 ( )

Fabricant : Mitsubishi Electronics Taille : 1.4 mb Nom Fichier : Langue d'enseignement:

4 cores 3) Air filters After pulling out the Lossnay core(s), pull the air filters, located at the bottom left and right of the Lossnay core(s), off the velcro that holds them in place. Models LGH-15 RX4: ................................................ 2 filters Models LGH-25 to 100 RX4: ..................................... 4 filters Models LGH-150 and 200 RX4: ................................ 8 filters Cleaning the parts 1) Air filters Use a vacuum cleaner to remove light dust. To remove stubborn dirt wash in a mild solution of detergent and lukewarm water. (under 40°C) CAUTION • Do not use the hard nozzle of the vacuum cleaner. It may damage the exposed surfaces of the Lossnay core(s). • Under no circumstances should the Lossnay core(s) be washed in water. Maintenance Models LGH-15 to 100 RX4 Models LGH-150 and 200 RX4 CAUTION • Never wash the filters in very hot water and never wash them by rubbing them. • Do not dry the filters by exposing them to a flame. 2) Lossnay core Use a vacuum cleaner to suck up the dust and dirt on the exposed surfaces of the Lossnay cores. Use a soft brush only to clean exposed surface areas. Corner Vacuum cleaner (with brush attachment) Lossnay core Do NOT wash in water. Vacuum cleaner Air filter Hinge Hinge bracket Maintenance cover Maintenance covers Hinge Operation (Continued) 1. Reduces cooling load If the air outside is cooler than the air inside the building during the cooling season (such as early morning or at night), “By-pass” ventilation will draw in the cooler outside air and reduce the cooling load on the system. 2. Night purge “By-pass” ventilation can be used to release hot air from inside the building that has accumulated in buildings a business district during the hot summer season. 3. Office equipment room cooling During cold season, outdoor air can be drawn in and used as is to cool rooms where the temperature has risen due to the use of office equipment. (Only when interlocked with City Multi and Mr. Slim indoor unit) Air filters Velcro Lossnay core Handle Handle Lossnay core Models LGH-15 to 100 RX4 Models LGH-150 and 200 RX4 Lossnay core Main unit Hinge bracket Maintenance (Continued) 2. Press the filter button on the remote controller (PZ-41SLB-E) two Assembly after maintenance times in succession. (This clears the Lossnay’s operating time cumulative data.) sequence for their removal in reverse. Relevant button 1. Bearing in mind the following points, assemble the parts following the Relevant display items • Attach the air filters to the magic tape on the Lossnay core(s). • Arrange the Lossnay core with the air filter side downward. FILTER (Press twice) FILTER Specifications 60H. . Invali. i. E. Mode. nam. Voltag. (V. Lin. frequenc. (Hz. Curren. (A. Powe. consumptio. (W. Ai. volum. Stati. pressur. Exchang. efficienc. (%. Nois. (dB(A). Weigh. (kg)(. /h). (L/S. Temperatur. Enthalp. Belo. th. uni. Ai. outlets(mmH2O. (Pa. Heatin. Coolin. LGH. 15RX. 1-Phas. 22. . 24. 5. 0.29-0.3. 63-7. 15. 4. 6.....

Téléchargez votre

Pour télécharger, entrez 2 chiffres :