Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
If the room temperature reaches 5°C higher than the set temperature, the air conditioner stops heating, but the fan continues to operate. . If the room temperature reaches 3°C lower than the set temperature, the air conditioner starts heating again. 4 Press the button to select the fan speed until the required setting is displayed. Automatic (rotated : .. .. ) Low Medium High Maximum Result: . Each time you press the button, the indoor unit beeps. . For the first 3~5 minutes, the fan may not operate to prevent cool air from flowing out of the indoor unit. This helps to warm the air in your room sufficiently. 5 To control the airflow direction, refer to page 21. ENGLISH E-16 Selecting Dry Mode Select Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . The air conditioner starts dehumidifying and the fan speed adjusts automatically. 4 To control the airflow direction, refer to page 21. E-17 Selecting Fan Mode Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Fan mode. . The temperature is set automatically. Note You can change modes at any time. 3 Press the button to select the fan speed until the required setting is displayed. Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 To control the airflow direction, refer to page 21. ENGLISH E-18 Selecting Mode mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on in cool/heat mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button to select or mode. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in cool or heat mode. 3 Press the button. - The remote control display shows you that...
Ce manuel est également adapté pour les modèles :Climatiseurs - AQ09FKN (6.57 mb)
Climatiseurs - AQ09FKX (6.57 mb)
Climatiseurs - AQ09NSAN (6.57 mb)
Climatiseurs - AQ09NSBN (6.57 mb)