The 113A has been designed utilizing Bryant’s Puron refrigerant. The environmentally sound refrigerant allows you to make a responsible decision in the protection of the earth’s ozone layer. As an Energy Starr Partner, Bryant Heating and Cooling has determined that this product meets the Energy Starr guidelines for energy efficiency. Refer to the combination ratings in the Product Data for system combinations that meet Energy Starr guidelines. NOTE: Ratings contained in this document are subject

The qualified installer or agency must use factory- --authorized kits or accessories when modifying this product. Refer to the individual instructions packaged with the kits or accessories when installing. Follow all safety codes. Wear safety glasses, protective clothing, and work gloves. Use quenching cloth for brazing operations. Have fire extinguisher available. Read these instructions thoroughly and follow all warnings or cautions included in literature and attached to the unit. Consult loca

The 165A has been designed utilizing Bryant’s Puron refrigerant. The environmentally sound refrigerant allows you to make a responsible decision in the protection of the earth’s ozone layer. As an Energy Star ® Partner, Bryant Heating & Cooling has determined that this product meets the Energy Star® guidelines for energy efficiency. Refer to the combination ratings in the Product Data for system combinations that meet Energy Star® guidelines. NOTE: Ratings contained in this document are subjec

0 – March 2002 Text Box: WARRANTY Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from defects in material and manufacture and will conform substantially to Bacharach Inc.’s applicable specifications. Bacharach’s liability and Buyer’s remedy under this warranty are limited to the repair or replacement, at Bacharach’s option, of this Product or parts thereof returned to Seller at the factory of manufacture and shown to Bacharach Inc.’s reasonable satisfact

317 240 5662 P. 001/001 PRODUCT DATA ELECTRONIC CONTROL OPTIONS AND FIA COMPONENTS These electronic pilot options are available for Model 246 Gas-Fired Boiler application. FIA does not approve a specific device or unit. Approval applies to the complete installation based upon the locai FIA engineer's evaluation ' of equipment, hazards of building usage, and the insurance liabilities involved, FIA generally recommends that gas-fired sectional boilers be equipped with electronically supervised

317 240 5662 Bryant AirConditioning Company iriâtructioris UNIT HEATERS 342S Series A Sizes 30 thru 400 Cancels; 39342D1 Before proceeding to install Models 342 and 342S Unit Heaters, refer to Bryant form No, 39003D1 “Procedures for Gas Appliances” (packaged with the equipment) for information concerning combustion, venting, piping, and other standard installation practices. The current edition of the American National Standard “Installation of Gas Appliances and Gas piping”, Z21.30, ta

Use pipe unions to join the unit heater to the ceiling hangar. 6. Do not lift the heater by the motor mount, manifold, or louvers. Use a rope sling whenever this IS possible. IV. WIRING. Make all electrical connections in accordance with the National Electric Code and any local codes .that may apply. The unit must be grounded electrically in accordance with the National Electric Code and local codes governing such installations. A permanent and uninterrupted or unbroken ,,gr ound-is-essenti a

For the chilled water circuit, use only chilled water additive "N" (Bryant part number 68593C1). NOTE: When this chiller is used in conjunction with a boiler, a 4 -pipe system must be used. A common piping system cannot be used. Use separate coils and piping. GENERAL Model 36-453, Series C, is a gas-fired air-cooled absorption refrigeration system, suitable for residential or small commercial air conditioning system. The 453 absorption unit is used for cooling in conjunction with indoor or o

It can be installed at ground level or on a rooftop. The 479 is factory assembled, pre-wired and charged with the primary refrigerant. Installation consists of the following: I. Locating the Unit II. Installing Vent Caps III. Duct Connections IV. Gas Connections V. Electrical Connections VI. Chilled Water System VII. Start-Up and Adjustments VIII. Furnace Operation IX, Cooling Operation X. Maintenance Read the entire Installation Instructions before starting installation. I. LOCAT

Purge Non-Condensibles. Each of the above steps is discussed in detail in this instruction. Read entire instruction before starting installation. Remove four shipping bolts holding absorption unit to crate base before placing unit on permanent mounting slab. NOTE: Unit is shipped with condenser fan guard inverted. Remove, place with convex side up and fasten. I. LOCATE AND MOUNTABSORPTION UNIT The absorption unit may be located at ground level or on the roof. Consult local codes for informa