Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other
11). 3. Remove the tines and felt washers from the shaft. 4. Clean and oil the shaft. 5. The tines are stamped with the letter "R" or "L" to identified their position on each side of the gearbox when facing the front of the unit. 6. Replace the tines and felt washers onto the shaft with the hubs on the tines facing each other. Clevis Pin Clip Felt Washer Tine Hubs Clevis Pin Fig. 11 7. Before you reinstall the clevis pins and pin clips, ensure that the tips on the tines are staggered when compar
Never allow adults to operate the equipment without proper instruction. • All guards and safety attachments must be installed properly before operating the unit. • Inspect the unit before use. Ensure the tines are installed correctly and secure. • Clear the area to be cultivated before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cultivator attachment. SPECIAL SAFETY WARNINGS FOR GAS POWERHEADS AND CULTIVATORS Gas
Description 49 753-04288 Pulley Retainer Assembly 50 791-182748 Recoil Pulley 51 753-04286 Recoil Spring Canister 52 791-182366 Nut Clip 53 791-181079 Pull Handle 54 791-611061 Rope Guide 55 791-182661 Rope 56 791-181020 Starter Housing Screw 57 753-04038 Starter Housing Assembly (includes 49-56) 58 791-182537 Wire Grommet 59 791-182368 Clutch Washer 60 753-1238 Clutch with Washer 61 791-153592 Clutch Drum 62 753-1239 Clutch Cover 63 791-181345 Clutch Cover Screw 64 753-04039 Lead Wire 65 753-04