Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
• Place lid on bowl, turn clockwise until the lid interlocks on bowl. • Place pusher into feeding chute • Turn dial clockwise on position “1” (LOWER). • To turn off, turn dial back counter-clockwise on position “O” (STOP). Proc essed Meas urem ent F ood Per batch Flour or Soft Chees e .300g Egg .5piec es Standard kneading period: 30-180 sec. Tips and Warning Always assemble the kneading blade inside the bowl, before adding the food (do NOT add the blade after the food is already in the bowl). EMULSIFYING DISK ASSEMBLY The emulsifying disk can be used to prepare mayonnaise, whisk egg whites, etc… • Position the driver (2) upright on motor base (1). • Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base. • Place the blade adaptor (4) onto the driver. • Place the plastics emulsifying disk (13) onto the blade adaptor. The blade shall lie flat, if in correct position, and not be wobbly • Place the food into the bowl. • Place lid on bowl, turn clockwise until the lid interlocks on bowl. • Place pusher into feeding chute • Turn dial clockwise on position “1” (LOWER), for mayonnaise for example, or “2” (HIGHER) – for egg whites – or depending on the desired results or recipe. 8 USK HA 31535 / 33143 -110127 Assembly page 8/28 Fax +32 2 359 95 50 • Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/-148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change the page numbering. Keep the language integrity. Print only what is inside the frame. • To turn off, turn dial back counter-clockwise on position “O” (STOP). Proc essed Measurem ent F ood Per batc h Egg 2~5pcs O il 125~350m l Standard emulsifying period: 60-180 sec. Tips and Warning The emulsifying disc can be used to mix cheese and egg, to make mayonnaise and pudding rapidly, or replace a whisk in most cases (egg whites, etc …) NEVER use the emulsifying Disc to knead flour. SLICING DISC, SHREDDING DISC & FRENCH FRY DISC ASSEMBLY • Position the driver (2) upright on motor base (1). • Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base. • Install the desired disc (8), (9) or (10) onto the disc holder (7). • Place disc holder onto the driver. • Place the lid on the bowl, turn the lid clockwise until it interlocks on the bowl. • Put food into the feeding chute. • Use pusher (6) to push the food down for processing. • Turn dial clockwise on position “1” (LOWER) for soft food or position “2” (HIGHER) for hard food. • To turn off, turn dial back counter-clockwise on position “O” (STOP). Tips and Warning • Choose the desired disc according to the processed food and desired shape of food. • Push softly when feeding food. • Pre-cut food into smaller pieces according to the diameter of feeding tube. 9 USK HA 31535 / 33143 -110127 Assembly page 9/28 Fax +32 2 359 95 50 • Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/-148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change the page numbering. Keep the language integrity. Print only what is inside the frame. • Feed gradually for better results. When cutting soft food, choose a lower speed (Position “1” to avoid the food turning soupy. If a large quantity food needs to be cut, please cut it in several batches. Please process maximum 40 Oz. per batch. Respect the recommended pauses in the operation between batches. CITRUS JUICER ASSEMBLY • Position the driver (2) upright on motor base (1). • Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base. • Place the citrus juicer sieve (14) on the bowl and turn clockwise to lock into position. • Position the Citrus Juicer Cone (15) on the driver. • Turn dial clockwise on position “1” (LOWER) • Juice the citrus by pressing the citrus cut in half on the rotary cone. • To turn off, turn dial back counter-clockwise on position “O” (STOP). Tips and Warning • Only lower speed (Position “1”) should be chosen for operating the citrus juicer attachment. • The maximum time for continuous operation is 30 (thirty) seconds, operations can be repeated 10 times with pauses of 15 seconds. OTHER PRACTICAL ADVICE • Do NOT use other utensils in place of the pushing device (for example: fingers, forks, knives, etc.). • To obtain finely and uniformly chopped food, cut the solid food into small pieces before placing it in the appliance; in some cases (parsley for example) it is best to use the “pulse” function to chop at intervals and to mix the food from time to ...
Ce manuel est également adapté pour les modèles :transformation des aliments - USK HA 31535 (489.86 kb)