Évaluations - 2, GPA: 3.5 ( )

Fabricant : Black & Decker Taille : 781.02 kb Nom Fichier : Langue d'enseignement:

Refer to your modem’s manual for the required commands to place the modem in 300 BAUD BELL 103 configuration. Two examples are “&F1&N1” and “N0S37=1”. If the initalization string is incorrect, the RA-2400 will display “ERROR WRITING INITIALIZATION STRING”. . NOTE: When entering a custom initialization string, don’t enter the “AT” command. The RA-2400 program will do this automatically. 4. CREATING A CUSTOM ACCOUNT PROFILE 4.1 NEW WINDOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2 CUSTOMER INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . 17 4.3 CONSOLE ACCESS CODES. . . . . . . . . . . . . . . . . . . . . . . . . 18 4.4 CONSOLE ARM/DISARM. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.5 CONSOLE ENTRY/EXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 4.6 CONSOLE ALARMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.7 CONSOLE HOME-AUTOMATION OUTPUT . . . . . . . . . . . . . . . . . 22 4.8 CONSOLE AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.9 SENSORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4.10 COMMUNICATOR MAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4.11 COMMUNICATOR ROUTING AND NUMBERS . . . . . . . . . . . . . . . 27 4.12 COMMUNICATOR ENABLED REPORTS . . . . . . . . . . . . . . . . . . 28 4.13 COMMUNICATOR 4 BY 2 FORMAT . . . . . . . . . . . . . . . . . . . . . 29 4.13.1 4 BY 2 POINT-TO-POINT ALARM CODES. . . . . . . . . . . . . . . . . . 30 4.13.2 4 BY 2 POINT-TO-POINT TROUBLE CODES . . . . . . . . . . . . . . . . 31 4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES. . . . . . . . . . . 32 4.13.4 4 BY 2 POINT-TO-POINT DISARMING (OPENING) CODES . . . . . . . . 33 4.13.5 CONSOLE ALARM CODES . . . . . . . . . . . . . . . . . . . . . . . . . 34 4.13.6 4 BY 2 GENERAL ALARM CODES . . . . . . . . . . . . . . . . . . . . . 35 4.14 ADEMCO CONTACT-ID REPORT CODES. . . . . . . . . . . . . . . . . . 36 Each installation requires an Account Profile. While many items are the same in different Consoles reporting to the same Central Station, some items (account number, customer information, & sensor information) are unique for each installation. A custom Account Profile is created by editing the DVS-2400 Account Profile template included with the RA-2400 software. The customized profile should then be saved with a unique name for the account and then sent to the DVS-2400 Console. To provide a clean start. Close any open Account Profiles on the workspace. NEW WINDOW PURPOSE: To select an Account Profile template for the type of unit being programmed. USER RESPONSE: NEW . Click on NEW icon on tool bar or select NEW from the FILE menu. . Select DVS-2400/2408 (with the correct Console firmware version number). . Click OK. The new Account Profile will appear as a starter template called DVS-2400/2408 Vx.x-1 (or -2, -3, etc.) in the workspace. 4.2 CUSTOMER INFORMATION PURPOSE: For entering customer information specific to the installation for the Account Profile. USER RESPONSE: CUSTOMER . NOTE: All fields are optional and do not have to be filled in. This information is not sent to the Console. . Enter a CUSTOMER ID for the installation. . Enter the customers name in the NAME field. . Enter the customers address in ADDRESS fields 1, 2, & 3. . Enter the customers telephone number(s) in PHONE fields 1 & 2. . Enter the number of the telephone line that the Console is connected to in the CONSOLE PHONE field. This field will show as the telephone number for the account in the Send/Receive window. . NOTE: DO NOT enter any dashes or spaces into the telephone number fields. Enter numbers only. . Enter any special information about the customer in the NOTES field. 4.3 CONSOLE ACCESS CODES PURPOSE: To install a Master Access Code and up to 5 Restricted Access Codes, a Duress Code, and a Page Alert Code. CODE DEFINITIONS: MASTER ACCESS CODE . Allows arming and disarming the Console. Allows access to all programming options. RESTRICTED ACCESS CODE . Allows arming and disarming the Console. Allows entering and editing Restricted Access Codes. DURESS ACCESS CODE . Allows all options of a Restricted Access Code and causes the Console to report the duress code to the Central Station if programmed to report. PAGE ALERT CODE . Allows all options of a Restricted Access Code and causes the Console to dial the supervisory number (see Section 4.11, Communicator Routing and Numbers). USER RESPONSE: ACCESS CODES . MASTER: When power is first applied to the Console the Master Access Code is “1234”. Enter any combination of 1 to 5 digits (3 to 5 digits recommended) for the Master Access Code. . RESTRICTED: Enter any combination of 1 to 5 digits (3 to 5 digits recommended) for Restricted Access Codes 1-5. . DURESS: Enter any combination of 1 to 5 digits (3 to 5 digits recommended) for the Duress Code. The Duress Code should be 2 or more digits different than any other user code to help minimize accident...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :