Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
A (11-98) TABLE OF CONTENTS MODEL FP400 FOOD PROCESSOR ............................................................................................. 3 GENERAL.......................................................................................................................................... 4 INSTALLATION ................................................................................................................................. 4 Unpacking .................................................................................................................................... 4 Location ....................................................................................................................................... 4 Leveling ....................................................................................................................................... 4 Electrical Connection .................................................................................................................. 4 Verify Correct Location ............................................................................................................... 5 Start-Up Testing .......................................................................................................................... 5 OPERATION ..................................................................................................................................... 6 Controls ....................................................................................................................................... 6 Installing the Cutting Tools ......................................................................................................... 7 Removing the Cutting Tools ....................................................................................................... 8 Installing and Removing the Feed Cylinder .............................................................................. 8 Installing and Removing the Feed Attachments ....................................................................... 9 Using the Food Processor ........................................................................................................ 11 Cutting Tool Guide .................................................................................................................... 11 Cleaning..................................................................................................................................... 13 MAINTENANCE .............................................................................................................................. 14 Replacement Dicing Grids ........................................................................................................ 14 Service ....................................................................................................................................... 14 TROUBLESHOOTING .................................................................................................................... 15 – 2 – MODEL FP400 FOOD PROCESSOR (Shown with Feed Hopper Attachment) © HOBART CORPORATION, 1998 – 3 – Installation, Operation and Care of HOBART MODEL FP400 FOOD PROCESSOR PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL The FP400 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables, fruits, or cheese. A wall rack, and a wide range of slicer, shredder, and dicing plates are available accessories. The machine is built for 208-240 volt, 60 Hertz, 3 phase electrical supply. INSTALLATION Before installing, verify that the electrical service agrees with the specifications on the data plate located on the back of the machine. UNPACKING Immediately after unpacking the FP400, check for possible shipping damage. If the food processor is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. LOCATION Place the FP400 in its installation location. Allow adequate space to sides and rear to swing pusher plate feed attachment and open feed cylinder. LEVELING Turn the adjustable feet to level the machine side-to-side and front-to-back. ELECTRICAL CONNECTION WARNING: THE ELECTRICAL CORD HAS A FOUR-PRONGED GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY GROUNDED RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THE PLUG. – 4 – VERIFY CORRECT ROTATION Verify correct rotation of the knife shaft. Make sure it moves in a clockwise direction looking down into the feed cylinder. If the rotation is incorrect, UNPLUG THE ELECTRICAL CORD and interchange any two of the three power supply leads (non grounding wires) inside the plug. Then, verify that the rotation is correct. START-UP TESTING 1. Check that the machine stops when the locking handle (Fig. 1) is pulled forward, unlocking the feed cylinder. 2. Check that the machine stops when the lockin...