4.13.2 4 BY 2 POINT-TO-POINT TROUBLE CODES PURPOSE: To view and edit the 24 sensor/zone trouble report codes. . NOTE: 4 by 2 Point-to-Point Reporting must be selected (see Section 4.13) for these codes to report. USER RESPONSE: ZONE CODES . Enter a new two-digit trouble code for any sensor/zone that needs to be changed. . NOTE: Entering a “0” for a trouble code will prevent that zone from reporting. 4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES PURPOSE: To view and edit the force arming re

The Arming Mode area will show the Console’s current mode. Pressing the REFRESH button will update the displayed information. Local Connection in Progress Remote Connection in Progress 5.4 SENDING DATA SEND BUTTON PURPOSE: For transferring data from an Account Profile to a DVS-2400 Console. . CAUTION: Receiving the data from the Console will overwrite the data in the Account Profile. If you have made changes to the Account Profile, save the profile, then send the profile to the Console before re

. Set the communicator reporting options (Section 4.12). . Set the communicator format reporting options (Section 4.13 or 4.14). 3. PROGRAM THE CONSOLE WITH THE ACCOUNT PROFILE . Choose an Account Profile (Section 5.2). . Connect to the Console (Section 5.3). . Send the data to the Console (Section 5.4). . Receive the data from the Console (Section 5.5). . Change the Console’s Mode (Section 5.6). . Disconnect from the Console (Section 5.7). IMPORTANT: AFTER ANY PROGRAMMING CHANGES ARE MADE TO A

. . . . . . . . . . . . . . . . . . . . . . . . . . 45 5.8 CLOSING RA-2400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 SOFTWARE DESCRIPTION What is the RA-2400 Remote Access Software? The RA-2400 Remote Access software is a communications program designed to work with Linear’s DVS Supervised Wireless Security Systems and other Linear products. The software runs on an IBM PC or compatible computer and connects to the console through the standar

The operator can still switch from listen to talk manually by pressing “1”, or switch from talk to listen by pressing “3” on a telephone connected to the line (with increased volume). Pressing “8” returns to two-way duplex. Pressing “9” disconnects the call. Press any key but “9” to extend the time 90 seconds. . Check the VOICE PROMPTS ENABLED box to have the Console announce system events with a digitally synthesized human voice. 4.9 SENSORS PURPOSE: To display and edit sensors installed in the