Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
READ THESE MESSAGES CAREFULLY. THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN THIS INSTRUCTION MANUAL. ON THE PRODUCT YOU WILL FIND IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES AND INSTRUCTIONS CAREFULLY. SAVE THESE INSTRUCTIONS FOR LATER USE. THE FOLLOWING WARNINGS ARE FOUND ON THIS PRODUCT. WARNING . Electrical shock hazard. Do not open. No user serviceable parts inside. Refer servicing to qualified service personnel. This safety message means that you could be seriously hurt or killed if you open the product and expose yourself to hazardous voltage. CAUTION HOT ROLLS. PINCH POINT. Keep hands and clothing away. This safety message means that you could be burned and your fingers and hands could be trapped and crushed in the hot rollers. Clothing, jewelry and long hair could be caught in the rollers and pull you into them. CAUTION SHARP BLADE. Keep hand and fingers away. This safety message means that you could cut yourself if you are not careful. . WARNING: THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN THIS INSTRUCTION MANUAL. THIS SYMBOL INDICATES A POTENTIAL PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR OTHERS, AS WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY DAMAGE. WARNING: DO NOT ATTEMPT TO SERVICE OR REPAIR THE LAMINATOR. . WARNING: DO NOT CONNECT THE LAMINATOR TO AN ELECTRICAL SUPPLY OR ATTEMPT TO OPERATE THE LAMINATOR UNTIL YOU HAVE COMPLETELY READ THESE INSTRUCTIONS. MAINTAIN THESE INSTRUCTIONS IN A CONVENIENT LOCATION FOR FUTURE REFERENCE. . WARNING: FOR YOUR PROTECTION, DO NOT CONNECT THE LAMINATOR TO ELECTRICAL POWER OR ATTEMPT TO OPERATE UNTIL YOU READ THESE INSTRUCTIONS COMPLETELY. KEEP OPERATING INSTRUCTIONS IN A CONVENIENT LOCATION FOR FUTURE REFERENCE. TO GUARD AGAINST INJURY, THE FOLLOWING BASIC SAFETY PRECAUTIONS MUST BE OBSERVED IN THE SET-UP AND USE OF THE LAMINATOR. General safeguards • Use this laminator only for its intended purposes as according to the specifications outlined in the operating instructions. • Keep hands, long hair, loose clothing and articles such as necklaces or ties away from the front of the pull rollers to avoid entanglement and entrapment. • Avoid contact with the heat shoes during operation or shortly after the laminator has been turned off. The heat shoes can reach temperatures in excess of 300.F. • Keep hands and fingers away from the path of the sharp film cutter blade located at the film exit. • Do not place the laminator on an unstable cart, stand or table. An unstable surface may cause the laminator to fall resulting in serious bodily injury. Avoid quick stops, excessive force and uneven floor surfaces when moving the laminator on a cart or stand. • Do not defeat or remove electrical and mechanical safety equipment such as interlocks, shields and guards. • Do not insert objects unsuitable for lamination. • Do not expose laminator to liquids. Electrical safeguards • This laminator must be connected to a supply voltage corresponding to the electrical rating as indicated on the serial plate located on the rear of the machine. • Unplug the laminator before moving it, or when it is not in use for an extended period of time. • Do not operate the laminator with a damaged power supply cord or plug. • Do not overload electrical outlets as this can result in fire or shock. • Do not alter the attachment plug. This plug is configured for the appropriate electrical supply. • The unit is intended for indoor use only. . CAUTION: The receptacle must be located near the equipment and easily accessible. Do not use an extension cord. • Disconnect the attachment plug from the receptacle to which it is connected and keep the power supply cord in your possession while moving the laminator. • Do not operate the laminator with a damaged power supply cord or attachment plug, upon occurrence of a malfunction, or after laminator has been damaged. Contact an authorized GBC service representative for assistance. (Text Box comment ABC Office) (Text Box comment 800.658.8788) (Text Box comment Service Perform only the routine maintenance procedures referred to in these instructions. Do not attempt to service or repair the laminator. Unplug the unit and contact an authorized GBC service representative for any required repairs or one or more of the following has occurred: • The power supply cord or attachment plug is damaged. • Liquid has been spilled into the laminator. • The laminator is malfunctioning after being mishandled. • The laminator does not operate as described in these instructions. . WARNING: THIS IS NOT A TOY - DO NOT ALLOW CHILDREN TO OPERATE THIS LAMINATOR! Installation • Shipping damage should be brought to the immediate attention of the delivering carrier. • Place the laminator on a stable flat surface capable of supporting 44lbs. The surface should be at least 30” high to assure comfortable positioning during operation. All four rubber feet should be on the supporting surface. • Connect power cord to an appropriate power source...