To insure high quality lamination, please read this instruction manual thoroughly. This manual will provide you with complete operating and maintenance information. For additional product support or factory-direct ordering information. Call Royal Sovereign Customer Service at 1-800-397-1025. SAFETY PRECAUTIONS The safety recommendations outlined in this section are to be read, understood and followed before operating machine. Keep this information for future reference. Failure to comply any of t

(Note :Turn the fastening nut of the Emergency switch counterclockwise and disaasemble the Emergency switch before disassembling the Right cover.) 2. Disassemble the Rear cover. 3. Disassemble the power switch bracket which is located at the left side of the machine. M5 screw 6EA Power switch bracket Plate-Rewinder L 4. Put the Plate-Rewinder L on the outer side of the frame as shown in the following figure and fasten it with six M5 screws. 5. Put the Plate-Rewinder R on the outer side of the fr

To insure high quality lamination, please read this instruction manual thoroughly. For additional product support or factory-direct ordering information, call Royal Sovereign Customer Service at (201)568-0830 or toll free call, (800)397-1025. SAFETY PRECAUTIONS The safety recommendations outlined in this section are to be read, understood and followed before operating the machine. Keep this information for future reference. Failure to comply with any of the following safety procedures could resu

6. Displayes the direction of the rollers. 7. Shows cold function. 175 Mic=7 mil, 250 Mic=10 mil 8 3. BUTTON FUNCTIONS : Check current temperature : Hot/Cold function : Working condition and T-CheckMEMORYHOT/COLDT-CheckMEMORYHOT/COLD Cold function cancel : Increase temperature : Decrease temperature : Increase speed : Decrease speed : Restore the memorized working setting : Restore the memorized working setting : Reverse function : Power On/Off 9 4. HOW TO SET THE BUTTONS (Buzzer rings each time

This will cause the laminator to jam. 7. Do not laminate leaves, flower, clothes etc. 8. If the room temperature is low (under 64.F), the ready light may take longer to come on. 9. When unplugging the power plug, grip the plug to pull it out. Pulling the cord may result in electric shock, fire, or damage to the machine. 10. Do not use the machine if the cord is damaged. This may result in electric shock, fire, or other hazards. 11. Do not place objects on the power cord and do not bend it excess

11. Do not place objects on the power cord and do not bend it excessively. This may result in electric shock, fire or other hazards. 12. When not using the machine for long periods of time, unplug the power cord from the outlet. 3 CONTeNTS Box Contents•••••••••••••••••••••••••••••••••••• 5 Parts•••••••••••••••••••••••••••••••••••••••••••• 5 Controls••••••••••••••••••••••••••••••••••••••••• 5 features••••••••••••••••••••••••••••••••••••••••• 5 Operation••••••••••••••••••••••••••••••••••••••• 6 Tr

Click the Customer Support Tab then Registration Tab. Pagina en Espanol 9 Page en Francais 17 Royal Sovereign International, Inc. LAMINATOR ES-410 SAFETY INSTRUCTIONS The safety recommendations outlined in this section should be read and understood before operating this machine. When using this machine follow these basic safety precautions to reduce risk of fire, electric shock or injury. Keep this information for future reference. 1. To prevent the possibility of a fire or injury, do not allow