Log:
Évaluations - 2, GPA: 5 ( )

Instructions Delta, Modèle 36-900

Fabricant : Delta
Taille : 665.23 kb
Nom Fichier : 43db3fec-ff1a-46cc-abe1-2c97da003b8d.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


422-04-651-0035 Dated: 7-22-96 MODEL 36-900 LIMITED EDITION NEW YANKEE WORKSHOP UNISAW The 36-900 Limited Edition, New Yankee Workshop Unisaw is equipped with a 52" Unifence, with table board and lower shelf, and features chrome handwheels, carbide-tipped saw blade and a personalized, engraved nameplate. For safety procedures, assembly, adjustments and operating instructions on the Limited Edition Unisaw, refer to the instruction manuals supplied with the Unisaw and Unifence, except as follows: Fig. 1 ASSEMBLING ENGRAVED NAMEPLATE 1. The saw has four pre-drilled holes (A) Fig. 2, located in the front of the cabinet to mount your personalized, engraved nameplate. 2. Attach nameplate (B) Fig. 3, to the front of the cabinet using four #6 self-tapping screws (C) supplied as shown. Fig. 2 Fig. 3 REPLACEMENT PARTS PART NUMBER 901-05-403-1500 422-04-400-0003 35-617 DESCRIPTION #6 x 3/8" long, pan-head screws (4) Chrome handwheel assembly Carbide-tipped saw blade...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories