Évaluations - 4, GPA: 4 ( )

Fabricant : Black & Decker Taille : 309.8 kb Nom Fichier : Langue d'enseignement:

Replacement batteries can be ordered from (valid Item Type Specifications This section contains important instructions that should be followed during Back-UPS installation and maintenance. The instructions are intended for APC customers who setup, install, relocate, or maintain APC equipment. This equipment is intended for installation in a temperature-controlled indoor area (see Specifications for exact temperature range), free of conductive contaminants. Electrical Safety To reduce the risk of fire, connect only to a circuit provided with 20-amp maximum branch circuit overturned protection. ! CAUTION! De-energizing Safety The Back-UPS has an internal energy source (the battery); the output may be energized when the unit is not connected to an AC power outlet. To de-energize pluggable equipment: switch the unit off. Disconnect the unit from utility power. Next, disconnect the equipment from the unit. The unit includes a protective earth conductor that carries the leakage currentfrom the connected devices. Total leakage current must not exceed 3.5 mA. Use of the unit in life support applications where failure of the unit canreasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. ! WARNING! Battery Safety • This unit contains no user-serviceable parts. This equipment containspotentially hazardous voltages. Do not attempt to disassemble the unit. Repairs are only performed by factory trained service personnel. • Do not dispose of batteries in a fire. The batteries may explode. • Do not open or mutilate batteries. They contain an electrolyte which is toxic and harmful to the skin and eyes. Batteries must be recycled. Deliver the entire Back- UPS to an appropriate recycling facility, or ship it to APCin the original packaging. ! credit card required). For Back-UPS 650, order APCRBC106 as directed by APC Technical Support. Warranty The standard warranty is 2 years from the date of purchase. APC’s standard procedure is to replace the original unit with a factory reconditioned unit. Customers who must have the original unit back due to assigned asset tags and set depreciation schedules must declare such a need at first contact with APC Technical Support. APC will ship the replacement unit once the defective unit is received by the repair department or cross-ship upon the provision of a valid credit card number. The customer pays for shipping to APC, and APC pays ground freight transportation costs back to the customer. Service Please DO NOT RETURN Back-UPS to the place of purchase under any circumstances. 1. Consult the Troubleshooting section to eliminate common problems. 2. If you still have problems or questions, please contact APC via the internet or at one of the phone numbers listed below. 3. Before contacting APC, please be sure to record the date purchased, UPS model, and serial number (on bottom of unit). 4. Be prepared to troubleshoot the p...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :