Log:
Évaluations - 5, GPA: 3.6 ( )

Instructions Furuno, Modèle 1835

Fabricant : Furuno
Taille : 2.74 mb
Nom Fichier : b97fd55c-b16e-4a92-9430-019e5d92222b.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


HOW TO INSTALL THE SYSTEM.....................................................................................1-1 1.1 Display Unit ............................................................................................................... 1-1 1.2 Antenna Unit for MODEL1835 .................................................................................. 1-3 1.3 Antenna Unit for MODEL1935/1945 ......................................................................... 1-9 2. CABLE CONNECTION ......................................................................................................... 2-1 2.1 Standard Connection ................................................................................................ 2-1 2.2 Data Signal Port ........................................................................................................ 2-2 3. HOW TO SET THE EQUIPMENT.......................................................................................... 3-1 3.1 How to Set the Language.......................................................................................... 3-1 3.2 How to Set the Purpose and Model .......................................................................... 3-2 3.3 How to Enter the Initial Settings................................................................................3-3 4. OPTIONAL EQUIPMENT......................................................................................................4-1 4.1 ARP Kit ARP-11 ........................................................................................................ 4-1 4.2 Connection of Buzzer and/or Remote Display .......................................................... 4-4 PACKING LISTS ...................................................................................................................... A-1 OUTLINE DRAWINGS ............................................................................................................. D-1 INTERCONNECTION DIAGRAMS ...........................................................................................S-1 All brand and product names are trademarks, registered trademarks or service marks of their respective holders. SAFETY INSTRUCTIONS WARNING Do not open the equipment unless totally familiar with electrical circuits and service manual. Only qualified personnel should work inside the equipment. ELECTRICAL SHOCK HAZARD Wear a safety belt and hard hat when working on the antenna unit. Serious injury or death can result if someone falls from the radar mast. Construct a suitable service platform from which to install the antenna unit. Serious injury or death can result if someone falls from the radar mast. Turn off the power at the mains switchboard before beginning the installation. Fire, electrical shock or serious injury can result if the power is left on or is applied while the equipment is being installed. CAUTION CAUTIONCAUTION Ground the equipment to prevent electrical shock and mutual interference. Observe the following compass safe distances to prevent deviation of a magnetic compass. Standard Steering Display unit 0.45 m 0.30 m M1835 Antenna unit 0.90 m 0.70 m M1935 Antenna unit M1945 Antenna unit Unit 1.00 m 1.00 m 0.75 m 0.75 m WARNING Radio Frequency Radiation Hazard The radar antenna emits electromagnetic radio frequency (RF) energy which can be harmful, particularly to your eyes. Never look directly into the antenna aperture from a close distance while the radar is in operation or expose yourself to the transmitting antenna at a close distance. Distances at which RF radiation levels of 100 and 10 W/m2 exist are given in the table below. Note: If the antenna unit is installed at a close distance in front of the wheel house, your administration may require halt of transmission within a certain sector of antenna revolution. This is possible - Ask your FURUNO representative or dealer to provide this feature. MODEL Distance to 100 W/m2 point Distance to 10 W/m2 point MODEL1835 Worse case 0.1 m Worse case 2.2 m MODEL1935 Worse case 0.2 m Worse case 2.2 m MODEL1945 Worse case 0.2 m Worse case 2.4 m ii SYSTEM CONFIGURATIONS 12 - 24 VDC Display unit RDP-152 100/110/220/230 VAC for M1835 External buzzer Echo sounder GPS navigator AIS, etc. Rectifier PR-62 Remote display : Basic configuration Heading sensor MODEL 1835 Antenna unit RSB-0071-057 Echo sounder GPS navigator AIS, etc. ECONOMY RANGE TLL GAIN TRAILS OFF CENTER TARGET ALARM STBY T X A/C SEA A/C RAIN CUSTOM MENU CANCEL EBL VRM HL OFF ENTER RB LL I MODEL 1945 Antenna unit XN-12A RSB-0070/0073-059 MODEL 1935 Antenna unit XN-10A RSB-0070/0073-064 100/110/115/220/230 VAC for M1935/1945 Rectifier RU-3423 EQUIPMENT LISTS Standard supply Name Type Code No. Qty Comment Display unit RDP-152 -1 Antenna unit RSB-0071-057 -1 Unit for M1835 XN10A-RSB-0070-064 Unit for M1935, 24 RPM XN10A-RSB-0073-064 Unit for M1935, 48 RPM XN12A-RSB-0070-059 Unit for M1945, 24 RPM XN12A-RSB-0073-059 Unit fo...

Ce manuel est également adapté pour les modèles :
équipement pour bateaux - 1935 (2.74 mb)
équipement pour bateaux - 1945 (2.74 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories