Log:
Évaluations - 4, GPA: 4.3 ( )

Instructions Furuno, Modèle DS-60

Fabricant : Furuno
Taille : 3.91 mb
Nom Fichier : 7f1da0b2-b510-4e2d-9f4b-0986918ebaff.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


WIRING...............................................................................................2-1 2.1 Distributor Unit DS-610..............................................................................................2-2 2.2 Transceiver Unit DS-620 ...........................................................................................2-5 2.3 Display Unit DS-600, Remote Controller RD-501/Dimmer Controller RD-502 (option) ...................................................................................................................................2-6 2.4 Junction Box DS-640 (option)....................................................................................2-8 3. MENU SETTINGS...............................................................................3-1 3.1 How to Use the Service Menu...................................................................................3-1 3.2 How to Set the System Menu ....................................................................................3-3 APPENDIX 1 CALIBRATION................................................................AP-1 APPENDIX 2 JIS CABLE GUIDE..........................................................AP-4 PACKING LISTS...................................................................................... A-1 OUTLINE DRAWINGS............................................................................. D-1 INTERCONNECTION DIAGRAM ............................................................ S-1 All brand and product names are trademarks, registered trademarks or service marks of their respective holders. The paper used in this manual is elemental chlorine free. .FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A :MAR.2010 Printed in Japan All rights reserved. Pub. No. IME-72640-A (HIMA ) DS-60 *00017233810* *00017233810**00017233810* * **00017233810 0001723381000017233810* ** * 0 0 0 1 7 2 3 3 8 1 0 * SAFETY INSTRUCTIONS WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. WARNING CAUTION Have a qualified serviceman do the installation. Only qualified personnel should work inside the equipment. Use Chugoku Toso brand Marine Star 20 anti-fouling paint or the equivalent for the transducer. Coat thinly and evenly. A thick coat can reduce output power. Turn off the power at the switchboard before installing the equipment. Fire or electrical shock can result if the power on. Confirm that the power supply voltage is compatible with the voltage rating of the equipment. Connection to the wrong power supply can cause fire or damage to the equipment. The mounting location for the display, distributor and transceiver unit must satisfy the following conditions: -Away from rain and water splash -Out of direct sunlight -Away from air conditioner vents -Moderate and stable in temperature and humidity Do not install the unit in a place subject to rain or water splash. Fire or electrical shock can result. Warning, Caution Mandatory ActionProhibitive Action Observe the compass safe distances to prevent interference to a magnetic compass. DS-600 0.60 m 0.40 m DS-605 0.95 m 0.60 m DS-610 3.15 m 2.00 m DS-620 3.20 m 2.05 m DS-640 1.15 m 0.70 m DS-340 1.05 m 0.65 m Standard Steering CAUTION Attach protective earth securely to the ship’s body. The protective earth (grounding) is required for the AC power supply to prevent electri- cal shock. Do not weld the tank with transducer to the ship’s hull. Use the specified power cable. Fire can result if an incorrect cable is used. i SYSTEM CONFIGURATIONS DISTRIBUTOR UNIT DS-610 JUNCTION BOX DS-640 TRANSCEIVER UNIT DS-620 IEC 61162 Output x 5 IEC 61162 Input x 3 Distance Run Pulse x 4 Alarm System External KP x 1 KP Output x 1 RATE-OF- TURN GYRO DS-340 Protected from weather DS-340, DS-600, DS-620, DS-640, RD-501, RD-502 DS-630, DS-631Exposed to weather Protected from weather DS-600 in DS-605 cabinet DS-600/ DISPLAY UNIT MAIN DISPLAY UNIT DS-600/ RD-50/RD-20 DISPLAY UNIT SUB DISPLAY UNIT 100-240 VAC TRANSDUCER DS-630 or DS-631 Dashed lines indicate optional equipment. Environmental category: Max. 5 Analog Meter Output x 2 RD-501 REMOTE CONTROLLER RD-502 DIMMER CONTROLLER RD-501 REMOTE CONTROLLER RD-502 DIMMER CONTROLLER Analog Voltage Output x 1 Analog Current Output x 1 ii EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks Display Unit DS-600 -1 8.4” color LCD Distributor Unit DS-610 -1 Transceiver Unit DS-620 -1 Transducer DS-630 -1 No watertight connector Select one. DS-631 -w/watertight connector Transducer Tank DS-660 -1 For DS-630/631 Select one. Gate Valve DS-661 -1 For DS-630 only Installation Material CP26-01501 001-081-900 1 set For DS-600 CP66-01701 001-082-190 1 set For DS-610 CP66-01702 001-082-290 1 s...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories