Évaluations - 1, GPA: 4 ( )

Fabricant : Attwood Taille : 413.93 kb Nom Fichier : Langue d'enseignement:

Attach box using all six screws. CAUTION: Do not overtighten screws. DECK WASHDOWN (4132) INSTALLATION 1. Using the template on the reverse side of these instructions, drill a 1/2" hole at all four corners of the template. Cut an 8-1/2" x 4" opening. 2. Remove cover and sprayhead. Place box in opening and mark all screw hole locations. Remove box and drill pilot holes. 3. Attach hose to pump outlet. Wrap hose connections with teflon tape or use pipe joint compound to prevent leaks. 4. Thread end of hose through hole in end of box and attach to end of sprayhead. 5. Connect wiring of switch to pump using insulated crimp-on connectors. Fuse according to pump manufacturers specifications. Run system to test all connections for leaks. 6. Place box in cutout opening. Check to be sure that the hose is free to be pulled out and pushed back into place. Attach box using all six screws. CAUTION: Do not overtighten screws. CARE AND MAINTENANCE Be sure to drain all water lines and fittings whenever system may be subjected to temperatures below freezing. This product carries the standard Attwood one-year limited warranty. See product catalog for details. © 2003 Attwood Corporation 1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :