Log:
Évaluations - 2, GPA: 4 ( )

Instructions ACR Electronics, Modèle Nauticast Y1-03-0204

Fabricant : ACR Electronics
Taille : 7.24 mb
Nom Fichier : cea4dd5c-e729-4e0b-ae7e-0f1ab0e86091.pdf
Langue d'enseignement: ende
Aller à la télécharger



Facilité d'utilisation


Upon Start-up (Applying power) enter the following information. a) Enter MMSI Number - See paragraph 4.1 on entering information. b) Enter IMO Number - See paragraph 4.1 on Entering information. c) Voyage related Data - After initial entry of the Voyage related Data any changes in the information below should be edited accordingly. See Paragraph 4.2 on entering information. Enter Cargo Type Enter Draught Enter Destination Enter ETA Enter Navigation Status. d) Enter Ship Settings Data - After initial entry of the Ship Settings Data any changes in the information below should be edited accordingly. See Paragraph 4.3 on entering information. Enter Call Sign Enter Ships Name Enter Length of Ship Enter Beam of Ship Enter Internal GPS antenna Position Enter External GPS Antenna Position (If Applicable). Enter Ship Type e) Password - Service and User passwords see section 4.4 4.1 Entering the MMSI and IMO Numbers: Select from the Main Menu “Service Configuration” Number 6. Menu is SERVICE password protected. The default password from the factory is mentioned on your AIS display at the protection foil. Please see the appendix in your User Manual for additional password information.. Enter Service Password and use the up and down arrows on keypad to select "Change MMSI / IMO” than press M5 "Select” or "by pressing number 3 on the keypad. Input your MMSI and IMO number and press Save to store data. Unit will reboot itself after pressing Save. Continue to 4.2 after reboot, if no IMO number is available use the value 0 (Zero). Installation Manual 33 Y1-Q3-Q2Q4 Rev.K ® ® (M3) (mÏ) N 1o19' E 0o13' |1>0.01|2>1.30|3>1.80nm Menu + - 1. Messages View + - 2. AIS Status + - 3. Voyage Settings + - 4. Ship Settings + - 5. Transponder Configuration Msg. + - 6. Service Configuration + - 7. Display Settings Displ + - 8. Graphical Display Settings NUMjSelect- -Back MOB [SRM A Menu (ms) (ms) (m?) (Ma) Service Configuration Menu Example: Note: MMSI and IMO Data input are limited to 9 characters. ✓- ® ® M3 (mÎ) (m™) (ms) (mb) (mt) (Ma) MOB] (SRM A Installation Manual 34 Y1-03-0204 Rev.K 4.2 Entering Voyage Related Data: Select from the Main Menu "Voyage Settings” Menu is USER password protected. The default password from the factory is mentioned on your AIS display at the protection foil. Please see the appendix in your User Manual for additional password information.. Enter Password and use the up and down arrows to edit Voyage Related data then press Enter or the numeric reference on the keypad to select and edit. Save after editing. Main Menu Example: Password inquiry Example: The password query field appears. Input password and press M5 [Enter]. Scroll to the Voyage Setting Fields with M5 [Enter] or up and down arrows and input your vessel data. Select a default Cargo Type, Draught, POB (Persons on board), Destination, ETA and Navigation Status Setting using the [Left] & [Right] arrow keys. Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing [Exit]. Press [Back] to return to the Main Menu without saving any changes. Installation Manual 35 Y1-03-0204 Rev.K Voyage Related Menu Example: 4.3 Entering Ship Settings: Select from the Main Menu "Ship Settings” Menu is USER password protected The default password from the factory is mentioned on your AIS display at the protection foil. Please see the appendix in your User Manual for additional password information.. Enter Password and use the up and down arrows to edit Ship Settings then press Enter or the numeric reference on the keypad to select and edit. Save after editing. Main Menu Example: Select Ship Settings and press M5 [Enter]. Enter User Password and Continue. Installation Manual 36 Y1-03-0204 Rev.K Ship Settings Menu Example: /- © (mi) ® M3 N48^12' E 16A2 6' | 1> N/A|2> N/A|3> N/Anm ************ Ship Settings ************* Call Sign OEZ1234 /\ + ShipName SOLAS 55 / \ I Ref.Points ext int I I A 200m 220m I A B 20m N/A I I C 10m 10m I +--I D 33m 33m I I B Len (A+B) 220m 220m I I I Beam(C+D) 43m 43m +-C-+D-+ Ship Type >>> DATA OK. PRESS M5 TO SAVE DATA <<< | Save | | (mÎ) (Menu) (ms) (mb) (m?) (Ma) MOB (SRM A Select and enter Call Sign. Select and enter Ship Name. Enter external GPS Antenna Position Enter internal GPS Antenna Position Select and enter a default ShipType with the [Left] & [Right] arrows. Setting the Internal and External GPS Antenna Position. Note: It is critical for the proper orientation of your ship to other AIS users to enter this data accurately. Example: Length of ship = 220m and Beam = 43m. GPS ANTENNA location on ship (is x in above Menu example). Antenna for external GPS is located 200 meters from bow (A) and 33 Meters from Starboard side (D). Antenna for internal GPS is located 220 meters from bow (A) and 33 Meters from Starboard side (D). GPS Antenna Mounting It is important to in...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories