1.3 Receiving To answer a call: 1. When a phone rings, pick up its handset and talk with the party. 2. Hang up the handset upon completion of the call. 2 1.4 Intercom The intercom function is available when two or more telephones are connected to the IB-782. It allows communication between the telephones of the IB-782 and the telephones/handset of the communication unit IB-282 and between the telephones of the IB-782. COMMUNICATION UNIT IB-282 ANTENNA UNIT IB-182 MULTI-COMMUNICATION UNIT IB-782

Distances at which RF radiation levels of 100 and 10 W/m2 exist are given in the table below. Note: If the scanner unit is installed at a close distance in front of the wheel house, your administration may require halt of transmission within a certain sector of scanner revolution. This is possible—Ask your FURUNO representative or dealer to provide this feature. Stay away from transmitting scanner. The radar scanner emits microwave radiation which can be harmful to the human body, particularly t

In this case, the PWR and OFF switches are disabled. Change jumper block setting on the SUB board to select 1 or 2. See page 10. The DIM key adjusts the brilliance of the keyboard and display in the following sequence. Dim d-1 d-2 d-3 Bright d-6 If the DIMMER unit is connected to the ED-2200, DIM key function is disabled. 3) ALARM Control The alarm sounds when the seabed goes shallower than the specified depth (shallow alarm mode). In waters where the depth is known to dramatically an

ZOOM RANGE: Select the range to zoom in the marker and bottom zoom modes. You may select a range between 7 and 2500 feet. Default setting is 30 feet. B/L RANGE: The expansion width for the bottom-lock display can be selected to 10 feet or 20 feet. Default setting is 20 feet. 2.3 Demonstration Display The demonstration display lets you get acquainted with the features of the FCV-582L without connecting the transducer. You can activate it as follows: 1. Turn on the power while pressing any key. 2.

Hi-Resolution 4.6" silver bright LCD display . Multiple steering modes - AUTO (Heading Control System), NAV (Track Control System), Advanced AUTO, AUTO Work, etc. . Simple operation - One touch Stand-by, Auto, Dodge and Nav controls . Heavy Duty Solenoid output for a variety of vessels and hydraulic pump combos . Precision XTE control (.001 nm) Magnetic North Heading Highway Auto Mode Set Course Cross Track Error The NavPilotTM 500 is a revolutionary autopilot designed for a variety of vessels.

2001 20012001 A AAll ri ll rill rig gghts reserved. Printed in Japan Printed in JapanPrinted in Japanhts reserved.hts reserved. C2 C2C2 : :: DEC. DEC.DEC. 10,2003 10,200310,2003 PUB.No. PUB.No.PUB.No. IME-23670-C2 IME-23670-C2IME-23670-C2 *00080922000* *00080922000* *00080922000* *00080922000**00080922000* ( (( TENI TENITENI ) )) FCV-1100L FCV-1100LFCV-1100L * 0 0 0 8 0 9 2 2 0 0 0 * * 0 0 0 8 0 9 2 2 0 0 0 ** 0 0 0 8 0 9 2 2 0 0 0 * *IME23670C20* *IME23670C20**IME23670C20* *IME23670C20* *IME236

OM-E2213-0J OPERATOR S MANUAL ECHO-SOUNDER MODEL FG-11/200 MARK-3 FURUNO ELECTRIC CO., LTD. NISHINOMIYA, JAPAN July, 1978 7807500J PRINTED IN JAPAN CONTENTS SPECIFICATIONS..........................................................................................................................2 Chapter 1. PRINCIPLE............................................................................................................3 Chapter 2. INSTALLATION..........................................

Navionics® is a trademark of Navionics®, registered in U.S. and other countries. Smart SensorTM is a trademark of AIRMAR, registered in U.S. and other countries. The future today with FURUNO's electronics technology. 9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111 Fax: +81 (0)798 65-4200, 66-4622 URL: Catalogue No. R-189a TRADEMARK REGISTERED MARCA REGISTRADA SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE FURUNO U.S.A., INC. Camas, Washington, U.S.A. FURUNO ESPANA S.A. Madr

Otherwise the time required for complete “saturation” ill be lengthened and performance will be reduced. DO NOT paint the transducer. Performance will be affected. 28 4.4 Inside-hull Transducer The thru-hull mount transducer (520-5PSD, 520-5MSD) may also be installed inside the hull, following the procedure below. Necessary tools You will need the following tools: • Sandpaper (#100) • Silicone sealant • Silicone grease Remarks on installation • Turn off the engine and anchor the boat while insta

FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya 662-8580, JAPAN Telephone : 0798-65-2111 Fax : 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : APR. 2003 G1 :OCT. 17, 2005 Pub. No. OME-72500 *00014698405* ( HIMA ) NAVPILOT-500 *00014698405* * 0 0 0 1 4 6 9 8 4 0 5 * *OME72500G10* *OME72500G10* * O M E 7 2 5 0 0 G 1 0 * SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WARNING Do not open the equipment unless you are well familiar with electrical circuits. Only qualifi