Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
What’s Included • Tape Recorder with Cassette Player • Earphone • Built-in Microphone • Erasing Plug • Owner’s Manual Dirt, dust, or particles can accumulate on the tape heads and other parts that the tape touches. This can greatly reduce the performance of the cassette player. After every 20 hours of tape player operation, clean the tape parts or use a RadioShack cassette deck cleaning kit. 1. Remove the batteries and disconnect any other power source. 2. Open the cassette compartment door and press PLAY to expose the tape parts. 3. Use a cotton swab dipped in denatured alcohol or tape head cleaning solution to clean the tape guides, record/play head, erase head, pinch roller, and capstan. 4. When you are finished, press STOP/EJECT and close the cassette compartment door. Then reconnect power. Tape Cleaning Step Six Recording from an External Audio Source You can record directly from an external audio source, such as a radio, tape deck, or CD player, using a suitable mono patch cord with a 1/8-inch plug (available at RadioShack). 1. Before connecting an external audio source to the recorder, make sure volume on the source and recorder are set to minimum. 2. Load a cassette tape in the compartment. 3. If you connected an external microphone, disconnect it. 4. Connect one end of your patch cord to your external audio source, and then connect the other end to the AUX jack. 5. Turn on the audio source and adjust its volume to a comfortable listening level. 6. Press RECORD to begin recording. Both PLAY and RECORD automatically remain pressed down while recording. 7. Press STOP/EJECT to stop recording. Most material on compact discs and prerecorded tapes is copyrighted. Unauthorized duplication of copyrighted material is a violation of the copyright laws of most countries and such duplication may result in fines and/or imprisonment. Please note that in the United States, it is not a violation of the U.S. copyright laws for a consumer to use an audio recording device to duplicate musical recordings for noncommercial (personal) use. Notes • Connecting an adapter disconnects the internal batteries. • To see if batteries need to be replaced, press PLAY, REWIND, or FAST-F. If the RECORD/BATT LED lights steadily, replace the batteries. • Press PAUSE at any time to stop tape playback. To resume playback, press PAUSE again. • Press REWIND or FAST-F to rapidly wind the tape backward or forward. To resume play, press STOP/EJECT, and then press PLAY. • Before loading a cassette tape for recording, be sure the cassette’s erase-protection tabs are in place. • The recorder’s Automatic Level Control circuit automatically adjusts the recording level. VOLUME has no effect on recording. • Connecting an external microphone automatically disconnects the built-in microphone. • To temporarily stop recording, press PAUSE, or set the microphone to OFF. To resume recording, press PAUSE again or set the microphone to ON. • During recording, the recorder’s speaker is muted. If you want to monitor recording, use the supplied earphone. Erase-Protection Tabs Keep the recorder dry; if it gets wet, wipe it dry immediately. Use and store the recorder only in room temperature environments. Handle the recorder carefully; do not drop it. Keep the recorder away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. If your recorder is not performing as it should, take it to your local RadioShack store for assistance. To locate your nearest RadioShack, use the store locator feature on RadioShack's website (or call 1-800-The Shack (843-7422) and follow the menu options. Modifying or tampering with the recorder's internal components can cause a malfunction and might invalidate its warranty. Cassette Player Track System ............................................................. 2-Track Monaural Tape Speed ......................................................................... 4.76 cm/sec Recording System .......................................... Magnetic Erase, AC Bias Frequency Response ........................................... 125 to 6.3 kHZ ±6 dB Signal to Noise Ratio ..................................................................... 55 dB Wow and Flutter .......................................................................... 0.20% General Power Requirements .................................. DC 6V, Four (4) C Batteries, AC Adapter, DC Adapter Dimensions (HWD) ..................................... 1 3/4 x 5 11/16 x 9 5/8 Inches 45 x 145 x 245 mm Weight (without batteries) ......................................... 1 lb 12 oz. (794 g) Tape Tips ©2003 RadioShack Corporation- 14-1117 All Rights Reserved. Printed in China RadioShack and RadioShack.com are trademarks 08A03 used by RadioShack Corporation. A This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for nintey (90) days from the date of purchase from RadioShack company-...
Ce manuel est également adapté pour les modèles :Récepteurs - 14-1117 (388.62 kb)