Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
The station you selected in step 3 is now stored in the preset CH number shown in the display. Note: Storing a station in memory automatically erases the station that was previously stored in that memory location (preset location). listening to a preset station 1. Make sure the radio is on by pressing RADIO ON/OFF. 2. Select the desired band (AM or FM) by pressing BAND. 3. Press and release the RECALL/SET button until the desired preset station appears in the display. Note: Preset stations will remain in memory for about 30 minutes when replacing batteries. If you have removed the batteries for more than 30 minutes, you may need to store stations in memory again. maximizing am reception For best AM reception, place the unit in a vertical position (with the volume knob and headphone jack facing up) when listening to AM stations. Maximum AM station reception can also be obtained by laying the unit on its back with the belt clip resting on a table or the floor. Using the cassette Tape Player STOP F FWD PLAY REW QUICK REVERSE DIR REV. MODE The Buttons DIR Shows you the direction the tape is playing. F FWD Press and lock to advance tape forward. PLAY Press and lock to play a tape. QUICK REVERSE Press to change tape direction. REV. MODE Select to play both sides of the tape continuously. REV. MODE When started from Side A, unit plays back both sides of the tape and stops. When started from Side B, the unit stops after Side B is finished playing. REW Press and lock to advance tape backward. STOP Press to stop PLAY, F FWD, or REW. Playing a cassette tape 1. Open the tape deck door by using the indexes on the side of the door and pulling the door open. 2. Insert a tape with the exposed tape facing toward the top of the unit. 3. Press REW or F FWD to move tape to the desired starting point. 3. Press and lock the PLAY button on the top of the unit. Important: The cassette tape won’t play if the radio is on. Using Auto Reverse/Continuous Play To continuously play both sides of the tape, set the REV MODE switch to To play each side of the tape once, set the REV MODE switch to Note: You must start playback on side A when you choose REV MODE The DIR indicator shows you which direction the tape is going. To change tape direction, press the QUICK REVERSE button. Care and Maintenance Cleaning the Exterior • Turn unit off before cleaning the exterior with a soft dust cloth. Tape Care • Don’t expose tapes to sunlight or store in hot places. High temperatures may warp the shell or damage the tape itself. • Keep cassettes in their boxes when not in use. • Cassette tapes can be erased by magnetic fields produced by magnets, electric motors, electrical transformers, and other devices. Keep tapes away from magnets and magnetic fields. Cleaning the Tape Heads Iron oxide particles from the magnetic tape can build up on the parts that come in contact with the tape. These deposits can cause incomplete erasure, muffled playback sound, and might prevent automatic stop. Make sure the unit is turned off and allow 30 minutes drying time when using a liquid cleaner. To clean a cassette tape, open the compartment door, push the PLAY button and gently clean the heads, capstan, and pinch wheel with a head cleaner. Clean heads after every 25 hours of use. • Demagnetize the head occasionally with a head demagnetizing cassette (available from many Clean these parts audio equipment stores). • Never use any metal objects on or near the tape heads. Do not allow any cleaning material to fall into the tape assembly. Quit Slacking A little bit of slack in your tapes can cause scratches on the tape, or worse yet, the tape could break. If you notice some slack in the tape, use a pencil to tighten it up before you insert it. A Limited Warranty What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • One year. (The warranty for rental units begins with the first rental.) What we will do: • Provide you with a new, or at our option, a refurbished unit. • The exchange unit is under warranty for the remainder of the original product’s warranty period. How to make a warranty claim: • Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials. • Include in the package evidence of purchase date such as the bill of sale. Also print your name and address and a description of the defect. Send standard UPS or its equivalent to: Thomson Consumer Electronics, Inc. Product Exchange Center 32 Spur Drive El Paso, Texas 79906 • Pay any charges billed to you by the Exchange Center for service not covered by the warranty. • A new or refurbished unit will be shipped to you prepaid freight. What your warranty does notcover: • Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and user controls. For additional information, ask your dealer.) • Installation and set-up service adjustments....