Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
After reading these instructions, put them in a safe place for future reference. CAUTION • To avoid fire or electric shock, keep the appliance away from water or moisture. To avoid electric shock, do not open the housing. The appliance should be repaired only by a qualified specialist. • Using the controls or the appliance in any way that is not described in these instructions can lead to exposure to dangerous levels of laser beam radiation. • OPENING THE HOUSING OR BREAKAGE/FAILURE OF THE BLOCKING SYSTEM CAN LEAD TO EXPOSURE TO INVISIBLE LASER RADIATION. AVOID DIRECT CONTACT WITH THE LASER LIGHT. The compact disk player is classified as a CLASS 1 LASER PRODUCT The CLASS 1 LASER PRODUCT label is on the rear panel of the appliance. NOTE: The manufacturer is not responsible for interference to radio or television sets occurring as a result of technical changes made by the user to this appliance. When using this appliance, you should avoid making any technical changes outside your competence. CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE CLASS 1 LASERAPPARAT 2 ENGLISH LOCATION OF CONTROLS 1. Speakers (Left & Right) 2. POWER button 3. Headphone jack 4. BASS BOOST button 5. VOLUME UP/DOWN buttons 6. Mode control switch 7. PAUSE button 8. STOP/EJECT button 9. FAST FORWARD button 10. BAND switch 11. REWIND button 12. PLAY button 13. RECORD button 14. Button for opening the CD compartment 15.TUNING knob 16.SKIP/SEARCH DOWN button 17. STOP button 18. PLAY/PAUSE button 19.SKIP/SEARCH UP button 20. PBC button 21.P/N button 22.CD compartment lid 23.Telescopic antenna 24. Carry handle 25. STANDBY/POWER Indicator 26. Remote control sensor 27. FM STEREO Indicator 28. Audio output jacks (only for VCD/CD/MP3 playback) 29. Speakers (Left/Right) 30 31 32 33 34 Radio tuning scale LCD display Battery compartment Power cord jack Built-in microphone 35. Video output jack (only for VCD/CD/MP3 playback) 36. AC voltage selector switch 37. Jack for external microphone 3 ENGLISH REMOTE CONTROL 38. On/Off button 39. Mute button 40. PBC button 41. P/N button 42. OSD button 43. REPEAT A-B button 44. REPEAT 1/ ALL button 45. PROGRAM button 46. ZOOM button 47. STEP button 48. VOLUME DOWN button 49. PLAY/PAUSE button 50. PREV button 51. Battery compartment lid 52. MODE button 53. Tone down button 54. Tone restore button 55. Tone up button 56. TIME button 57. RETURN/STOP button 58. NEXT button 59. VOLUME UP button 60. SLOW button 61. SOUND button 62. AUDIO button 63. Numeric buttons POWER SOURCE (SYSTEM WITH 2 POWER SOURCES) This appliance is designed to be used from two different power sources, which are listed below: DC POWER SOURCE This appliance can be powered by 8 type UM2 or C batteries. For best results, always use alkaline batteries. INSTALLING THE BATTERIES 1. Remove the battery compartment lid by gently pressing on it and pulling it up. Insert 8 type UM2 or C batteries. MAKE SURE TO OBSERVE POLARITY (+/-), AS INDICATED ON THE INSIDE OF THE COMPARTMENT. 2. Close the lid. NOTE: To avoid damage to your appliance, remove the batteries if the appliance will not be used for a long time or if the batteries have gone dead. NOTE: If you wish to power the appliance with batteries, unplug the power cord both from the power outlet and from the rear panel of the appliance. AC POWER SOURCE Insert one end of the power cord into power cord jack (33), and the other end into AC outlet. NOTE: If your appliance is equipped with AC input voltage selector switch, make sure that it is set on voltage the same as voltage in you local area. 4 ENGLISH CONTROLS AND FUNCTIONS CONNECTING THE APPLIANCE TO A TELEVISION SET: 1. To connect the appliance to a television set through a SCART type cable, you must use an RCA-to-SCART adapter, which can be purchased wherever audio-video equipment is sold. 2. To play NTSC disks, you must connect the appliance to a multi-system or NTSC television set. 3. Before connecting this appliance to a television set, make sure that it is turned off, and the power cord is disconnected from the AC power outlet. 4. Do not close the ventilation openings on either of the appliances and place them in a way that allows air to circulate freely. 5. Before connecting the appliance to another appliance, read the instructions for the other appliance completely. 6. When connecting audio/video cables, observe color coding. 7. During playback, the volume of the television set may be less than when receiving broadcasts programming. If this happens, set the volume to a desired level. 8. For correct connection of the unit to a TV-set by audio/video RCA-cable follow the diagram below NOTE: If the appliance is not connected correctly to a television set, the audio or video might not function properly. If this happens, disconnect the power source, check all connections, and turn the appliance on once again. LIQUID CRYSTAL DISPLAY (31) 1. Shows when C...